🎉 Up to 70% Off Selected ItemsShop Sale
[SN 6248] USED Valley Arts / M-Series ST Type Trans Red [11]
The Valley Arts ST model combines a vintage-style Stratocaster design with studio-oriented practicality.
Featuring an ash body finished in a deep, translucent red, it boasts a striking appearance that highlights the natural grain of the wood. The ebony fingerboard delivers a tight sound image and impressive attack, producing a clear, focused tone.
It is equipped with three single-coil pickups bearing the "Valley Arts Manufacturing" logo. While featuring an EMG-like appearance, these pickups are characterized by a clear, low-noise sound and a wide dynamic range, making them suitable for everything from clean to distorted tones.
Controls include a 5-way selector switch and a two-tone system for the front and middle pickups. The rear pickup is wired directly without passing through the tone control, allowing for the direct output of a crisp, penetrating sound.
The bridge features a 6-point synchronized tremolo system, balancing ease of use with stable playability. With hardware unified in gold and details like logo-engraved tuning pegs and a logo-engraved joint plate, this guitar showcases a commitment to quality in every detail.
While retaining the classic Stratocaster character, this practical design incorporates player-oriented refinements throughout. It’s easy to play across all genres and will serve as a reliable workhorse.
Missing lock pin.
The pots and selector switch have been replaced due to malfunctions. The pickup lead wires were too short, so they have been replaced with equivalent vinyl-coated wire.
It appears the pickguard has been replaced, as there are screw holes that do not match the original ones.
Due to a crack in the wood near the selector switch, the pickguard screw could not be installed in one location; therefore, the wood has been glued and a temporary screw hole has been created.
There is a crack at the neck joint on the G-string side.
Overall, there are scratches, dents, peeling metal plating, and rust, showing signs of use.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use
Serial Number: 5448
Case: Hard case
Accessories: Tremolo arm * Locking pin missing
Weight: 3.64 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 19.4 mm
Neck thickness near the 12th fret: 22.5 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring an ash body finished in a deep, translucent red, it boasts a striking appearance that highlights the natural grain of the wood. The ebony fingerboard delivers a tight sound image and impressive attack, producing a clear, focused tone.
It is equipped with three single-coil pickups bearing the "Valley Arts Manufacturing" logo. While featuring an EMG-like appearance, these pickups are characterized by a clear, low-noise sound and a wide dynamic range, making them suitable for everything from clean to distorted tones.
Controls include a 5-way selector switch and a two-tone system for the front and middle pickups. The rear pickup is wired directly without passing through the tone control, allowing for the direct output of a crisp, penetrating sound.
The bridge features a 6-point synchronized tremolo system, balancing ease of use with stable playability. With hardware unified in gold and details like logo-engraved tuning pegs and a logo-engraved joint plate, this guitar showcases a commitment to quality in every detail.
While retaining the classic Stratocaster character, this practical design incorporates player-oriented refinements throughout. It’s easy to play across all genres and will serve as a reliable workhorse.
Missing lock pin.
The pots and selector switch have been replaced due to malfunctions. The pickup lead wires were too short, so they have been replaced with equivalent vinyl-coated wire.
It appears the pickguard has been replaced, as there are screw holes that do not match the original ones.
Due to a crack in the wood near the selector switch, the pickguard screw could not be installed in one location; therefore, the wood has been glued and a temporary screw hole has been created.
There is a crack at the neck joint on the G-string side.
Overall, there are scratches, dents, peeling metal plating, and rust, showing signs of use.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use
Serial Number: 5448
Case: Hard case
Accessories: Tremolo arm * Locking pin missing
Weight: 3.64 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 19.4 mm
Neck thickness near the 12th fret: 22.5 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$5.86
[SN 6248] USED Valley Arts / M-Series ST Type Trans Red [11]—
$5.86
Description
The Valley Arts ST model combines a vintage-style Stratocaster design with studio-oriented practicality.
Featuring an ash body finished in a deep, translucent red, it boasts a striking appearance that highlights the natural grain of the wood. The ebony fingerboard delivers a tight sound image and impressive attack, producing a clear, focused tone.
It is equipped with three single-coil pickups bearing the "Valley Arts Manufacturing" logo. While featuring an EMG-like appearance, these pickups are characterized by a clear, low-noise sound and a wide dynamic range, making them suitable for everything from clean to distorted tones.
Controls include a 5-way selector switch and a two-tone system for the front and middle pickups. The rear pickup is wired directly without passing through the tone control, allowing for the direct output of a crisp, penetrating sound.
The bridge features a 6-point synchronized tremolo system, balancing ease of use with stable playability. With hardware unified in gold and details like logo-engraved tuning pegs and a logo-engraved joint plate, this guitar showcases a commitment to quality in every detail.
While retaining the classic Stratocaster character, this practical design incorporates player-oriented refinements throughout. It’s easy to play across all genres and will serve as a reliable workhorse.
Missing lock pin.
The pots and selector switch have been replaced due to malfunctions. The pickup lead wires were too short, so they have been replaced with equivalent vinyl-coated wire.
It appears the pickguard has been replaced, as there are screw holes that do not match the original ones.
Due to a crack in the wood near the selector switch, the pickguard screw could not be installed in one location; therefore, the wood has been glued and a temporary screw hole has been created.
There is a crack at the neck joint on the G-string side.
Overall, there are scratches, dents, peeling metal plating, and rust, showing signs of use.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use
Serial Number: 5448
Case: Hard case
Accessories: Tremolo arm * Locking pin missing
Weight: 3.64 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 19.4 mm
Neck thickness near the 12th fret: 22.5 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring an ash body finished in a deep, translucent red, it boasts a striking appearance that highlights the natural grain of the wood. The ebony fingerboard delivers a tight sound image and impressive attack, producing a clear, focused tone.
It is equipped with three single-coil pickups bearing the "Valley Arts Manufacturing" logo. While featuring an EMG-like appearance, these pickups are characterized by a clear, low-noise sound and a wide dynamic range, making them suitable for everything from clean to distorted tones.
Controls include a 5-way selector switch and a two-tone system for the front and middle pickups. The rear pickup is wired directly without passing through the tone control, allowing for the direct output of a crisp, penetrating sound.
The bridge features a 6-point synchronized tremolo system, balancing ease of use with stable playability. With hardware unified in gold and details like logo-engraved tuning pegs and a logo-engraved joint plate, this guitar showcases a commitment to quality in every detail.
While retaining the classic Stratocaster character, this practical design incorporates player-oriented refinements throughout. It’s easy to play across all genres and will serve as a reliable workhorse.
Missing lock pin.
The pots and selector switch have been replaced due to malfunctions. The pickup lead wires were too short, so they have been replaced with equivalent vinyl-coated wire.
It appears the pickguard has been replaced, as there are screw holes that do not match the original ones.
Due to a crack in the wood near the selector switch, the pickguard screw could not be installed in one location; therefore, the wood has been glued and a temporary screw hole has been created.
There is a crack at the neck joint on the G-string side.
Overall, there are scratches, dents, peeling metal plating, and rust, showing signs of use.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B: Shows significant scratches and signs of use, but is in good working condition for normal use
Serial Number: 5448
Case: Hard case
Accessories: Tremolo arm * Locking pin missing
Weight: 3.64 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight waviness present)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 19.4 mm
Neck thickness near the 12th fret: 22.5 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind piece and is listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
