🎉 Up to 70% Off Selected ItemsShop Sale
USED FERNANDES / FST-70 Yellow Sunburst [11]
Fernandez, the leading ST-type guitar made in Japan.
Produced in the 70's and 80's, this model combines a classic Strat shape with an SSS pickup layout for solid playability and powerful tone.
The body is made of Sen wood, with a one-piece maple neck and rosewood fingerboard for stable playability.
Three Fernandes original L-2 single coils are installed as pickups, and the original 5-stage switch covers a wide range of sound variations. The simple control configuration of Volume 1 and Tone 2 allows you to enjoy vintage-like natural and clear tone.
The fretboard RADIUS has a slightly tighter curve than the typical 7.25" and cannot be measured.
There are some paint lifts, scrapes, and dings, but it is in relatively good condition for its age.
There are no noticeable abnormalities in the neck and no playing condition problems.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: non-genuine soft case
Accessories: Arm
Weight: 3.86kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.0mm
Scale: 648mm (25.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Produced in the 70's and 80's, this model combines a classic Strat shape with an SSS pickup layout for solid playability and powerful tone.
The body is made of Sen wood, with a one-piece maple neck and rosewood fingerboard for stable playability.
Three Fernandes original L-2 single coils are installed as pickups, and the original 5-stage switch covers a wide range of sound variations. The simple control configuration of Volume 1 and Tone 2 allows you to enjoy vintage-like natural and clear tone.
The fretboard RADIUS has a slightly tighter curve than the typical 7.25" and cannot be measured.
There are some paint lifts, scrapes, and dings, but it is in relatively good condition for its age.
There are no noticeable abnormalities in the neck and no playing condition problems.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: non-genuine soft case
Accessories: Arm
Weight: 3.86kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.0mm
Scale: 648mm (25.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$0.78
Original: $2.24
-65%USED FERNANDES / FST-70 Yellow Sunburst [11]—
$2.24
$0.78
Description
Fernandez, the leading ST-type guitar made in Japan.
Produced in the 70's and 80's, this model combines a classic Strat shape with an SSS pickup layout for solid playability and powerful tone.
The body is made of Sen wood, with a one-piece maple neck and rosewood fingerboard for stable playability.
Three Fernandes original L-2 single coils are installed as pickups, and the original 5-stage switch covers a wide range of sound variations. The simple control configuration of Volume 1 and Tone 2 allows you to enjoy vintage-like natural and clear tone.
The fretboard RADIUS has a slightly tighter curve than the typical 7.25" and cannot be measured.
There are some paint lifts, scrapes, and dings, but it is in relatively good condition for its age.
There are no noticeable abnormalities in the neck and no playing condition problems.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: non-genuine soft case
Accessories: Arm
Weight: 3.86kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.0mm
Scale: 648mm (25.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Produced in the 70's and 80's, this model combines a classic Strat shape with an SSS pickup layout for solid playability and powerful tone.
The body is made of Sen wood, with a one-piece maple neck and rosewood fingerboard for stable playability.
Three Fernandes original L-2 single coils are installed as pickups, and the original 5-stage switch covers a wide range of sound variations. The simple control configuration of Volume 1 and Tone 2 allows you to enjoy vintage-like natural and clear tone.
The fretboard RADIUS has a slightly tighter curve than the typical 7.25" and cannot be measured.
There are some paint lifts, scrapes, and dings, but it is in relatively good condition for its age.
There are no noticeable abnormalities in the neck and no playing condition problems.
Item Rank: B+: Some scratches, but no problems in normal use.
Case: non-genuine soft case
Accessories: Arm
Weight: 3.86kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.0mm
Scale: 648mm (25.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
