🎉 Up to 70% Off Selected ItemsShop Sale
[SN 001683] USED Brian / ST Type 24F HH RED MH [11]
This appears to be an early Brian model manufactured around the 1990s.
It may have been manufactured domestically, and its vivid red body, neck, and headstock are eye-catching. The pickguard is a white 1-ply. The fingerboard appears to be made of a rosewood-type wood, though the exact details are unknown.
It features two humbucker pickups, volume and tone controls, a 3-way selector switch, and a 6-point synchronized tremolo system, offering excellent playability.
There are some scratches and dents, and it shows moderate signs of use.
The neck has a slight wave due to reverse bowing on the low-fret side and positive bowing on the high-fret side. The frets have been leveled, and there are currently no issues with playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 001683
Case: Non-original soft case
Accessories: Tremolo arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics (cleaning, jack replacement)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It may have been manufactured domestically, and its vivid red body, neck, and headstock are eye-catching. The pickguard is a white 1-ply. The fingerboard appears to be made of a rosewood-type wood, though the exact details are unknown.
It features two humbucker pickups, volume and tone controls, a 3-way selector switch, and a 6-point synchronized tremolo system, offering excellent playability.
There are some scratches and dents, and it shows moderate signs of use.
The neck has a slight wave due to reverse bowing on the low-fret side and positive bowing on the high-fret side. The frets have been leveled, and there are currently no issues with playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 001683
Case: Non-original soft case
Accessories: Tremolo arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics (cleaning, jack replacement)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$0.82
Original: $2.33
-65%[SN 001683] USED Brian / ST Type 24F HH RED MH [11]—
$2.33
$0.82
Description
This appears to be an early Brian model manufactured around the 1990s.
It may have been manufactured domestically, and its vivid red body, neck, and headstock are eye-catching. The pickguard is a white 1-ply. The fingerboard appears to be made of a rosewood-type wood, though the exact details are unknown.
It features two humbucker pickups, volume and tone controls, a 3-way selector switch, and a 6-point synchronized tremolo system, offering excellent playability.
There are some scratches and dents, and it shows moderate signs of use.
The neck has a slight wave due to reverse bowing on the low-fret side and positive bowing on the high-fret side. The frets have been leveled, and there are currently no issues with playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 001683
Case: Non-original soft case
Accessories: Tremolo arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics (cleaning, jack replacement)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It may have been manufactured domestically, and its vivid red body, neck, and headstock are eye-catching. The pickguard is a white 1-ply. The fingerboard appears to be made of a rosewood-type wood, though the exact details are unknown.
It features two humbucker pickups, volume and tone controls, a 3-way selector switch, and a 6-point synchronized tremolo system, offering excellent playability.
There are some scratches and dents, and it shows moderate signs of use.
The neck has a slight wave due to reverse bowing on the low-fret side and positive bowing on the high-fret side. The frets have been leveled, and there are currently no issues with playability.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 001683
Case: Non-original soft case
Accessories: Tremolo arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics (cleaning, jack replacement)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
