🎉 Up to 70% Off Selected ItemsShop Sale
[SN E816019] USED Squier / SST-36 Black [11]
The Japanese-made Squier Silver Series Stratocaster "SST-36" has arrived!
Based on the "Made in Japan" label and serial number "E816019," this is believed to be a model produced by Fujigen between 1984 and 1987.
Unlike Squier guitars currently manufactured in China or Indonesia, this model is highly popular for its superior craftsmanship unique to Japanese-made instruments!
It features 1 volume, 2 tone controls, and a 5-way pickup selector.
You can feel the meticulous craftsmanship typical of Japanese-made instruments, making this a great choice not only for beginners but also, in recent years, for collectors and serious players!
Overall, it shows signs of wear appropriate for its age, including scratches, dents, and paint chipping.
Rust and tarnish are visible on the metal parts.
The pickup covers show sun fading and discoloration likely due to aging.
There are scratches and dirt on the back panel, and a large crack in the finish on the back of the body.
* The action was too high, so it has been adjusted by recessing the neck joint.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: E816019
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: Arm
Weight: 3.38 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (low remaining travel, some twisting and waviness)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, fret leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Based on the "Made in Japan" label and serial number "E816019," this is believed to be a model produced by Fujigen between 1984 and 1987.
Unlike Squier guitars currently manufactured in China or Indonesia, this model is highly popular for its superior craftsmanship unique to Japanese-made instruments!
It features 1 volume, 2 tone controls, and a 5-way pickup selector.
You can feel the meticulous craftsmanship typical of Japanese-made instruments, making this a great choice not only for beginners but also, in recent years, for collectors and serious players!
Overall, it shows signs of wear appropriate for its age, including scratches, dents, and paint chipping.
Rust and tarnish are visible on the metal parts.
The pickup covers show sun fading and discoloration likely due to aging.
There are scratches and dirt on the back panel, and a large crack in the finish on the back of the body.
* The action was too high, so it has been adjusted by recessing the neck joint.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: E816019
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: Arm
Weight: 3.38 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (low remaining travel, some twisting and waviness)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, fret leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.32
Original: $3.77
-65%[SN E816019] USED Squier / SST-36 Black [11]—
$3.77
$1.32
Description
The Japanese-made Squier Silver Series Stratocaster "SST-36" has arrived!
Based on the "Made in Japan" label and serial number "E816019," this is believed to be a model produced by Fujigen between 1984 and 1987.
Unlike Squier guitars currently manufactured in China or Indonesia, this model is highly popular for its superior craftsmanship unique to Japanese-made instruments!
It features 1 volume, 2 tone controls, and a 5-way pickup selector.
You can feel the meticulous craftsmanship typical of Japanese-made instruments, making this a great choice not only for beginners but also, in recent years, for collectors and serious players!
Overall, it shows signs of wear appropriate for its age, including scratches, dents, and paint chipping.
Rust and tarnish are visible on the metal parts.
The pickup covers show sun fading and discoloration likely due to aging.
There are scratches and dirt on the back panel, and a large crack in the finish on the back of the body.
* The action was too high, so it has been adjusted by recessing the neck joint.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: E816019
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: Arm
Weight: 3.38 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (low remaining travel, some twisting and waviness)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, fret leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Based on the "Made in Japan" label and serial number "E816019," this is believed to be a model produced by Fujigen between 1984 and 1987.
Unlike Squier guitars currently manufactured in China or Indonesia, this model is highly popular for its superior craftsmanship unique to Japanese-made instruments!
It features 1 volume, 2 tone controls, and a 5-way pickup selector.
You can feel the meticulous craftsmanship typical of Japanese-made instruments, making this a great choice not only for beginners but also, in recent years, for collectors and serious players!
Overall, it shows signs of wear appropriate for its age, including scratches, dents, and paint chipping.
Rust and tarnish are visible on the metal parts.
The pickup covers show sun fading and discoloration likely due to aging.
There are scratches and dirt on the back panel, and a large crack in the finish on the back of the body.
* The action was too high, so it has been adjusted by recessing the neck joint.
The neck shows no noticeable abnormalities and is in good playing condition.
Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use
Serial Number: E816019
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Non-original soft case
Accessories: Arm
Weight: 3.38 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (low remaining travel, some twisting and waviness)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, fret leveling, nut adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any listed measurements for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
