🎉 Up to 70% Off Selected ItemsShop Sale
[SN 0103016] USED Washburn / N4 Ash PWS Trans Red [11]
A USA-made N4 Ash model with a crisp, responsive sound
Washburn N4 Ash PWS. This model bears the "Made in USA" stamp and is positioned at the top of the N4 series' production lineup. The body is crafted from ash, resulting in a design that stands out for its light attack and excellent high-end clarity.
It features the classic N4 configuration with a Seymour Duncan pickup in the neck position and a Bill Lawrence L-500 in the bridge position. The neck pickup delivers a thick, smooth clean and crunch tone, while the bridge pickup produces a high-gain tone with sharp attack and excellent separation, making it highly versatile for everything from rhythm work to lead playing.
The direct response characteristic of a U.S.-made guitar, combined with the speed inherent to an ash body, gives this model a particularly crisp and cutting tone—even among N4 guitars. This is a model we highly recommend to players seeking a practical, rock-oriented sound.
There are signs of use, including scratches, dents, and some discoloration or rust on parts.
There is some warping in the neck; we have performed a setup including truss rod adjustment, but
there is some slight buzzing when played unplugged, though it is not noticeable when played through an amp.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 0103016
Country of Manufacture: USA
Case: Soft case
Weight: 3.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some twist present)
Fret Wear: Note: Can still withstand filing, but frets are low
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Washburn N4 Ash PWS. This model bears the "Made in USA" stamp and is positioned at the top of the N4 series' production lineup. The body is crafted from ash, resulting in a design that stands out for its light attack and excellent high-end clarity.
It features the classic N4 configuration with a Seymour Duncan pickup in the neck position and a Bill Lawrence L-500 in the bridge position. The neck pickup delivers a thick, smooth clean and crunch tone, while the bridge pickup produces a high-gain tone with sharp attack and excellent separation, making it highly versatile for everything from rhythm work to lead playing.
The direct response characteristic of a U.S.-made guitar, combined with the speed inherent to an ash body, gives this model a particularly crisp and cutting tone—even among N4 guitars. This is a model we highly recommend to players seeking a practical, rock-oriented sound.
There are signs of use, including scratches, dents, and some discoloration or rust on parts.
There is some warping in the neck; we have performed a setup including truss rod adjustment, but
there is some slight buzzing when played unplugged, though it is not noticeable when played through an amp.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 0103016
Country of Manufacture: USA
Case: Soft case
Weight: 3.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some twist present)
Fret Wear: Note: Can still withstand filing, but frets are low
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$5.18
Original: $14.79
-65%[SN 0103016] USED Washburn / N4 Ash PWS Trans Red [11]—
$14.79
$5.18
Description
A USA-made N4 Ash model with a crisp, responsive sound
Washburn N4 Ash PWS. This model bears the "Made in USA" stamp and is positioned at the top of the N4 series' production lineup. The body is crafted from ash, resulting in a design that stands out for its light attack and excellent high-end clarity.
It features the classic N4 configuration with a Seymour Duncan pickup in the neck position and a Bill Lawrence L-500 in the bridge position. The neck pickup delivers a thick, smooth clean and crunch tone, while the bridge pickup produces a high-gain tone with sharp attack and excellent separation, making it highly versatile for everything from rhythm work to lead playing.
The direct response characteristic of a U.S.-made guitar, combined with the speed inherent to an ash body, gives this model a particularly crisp and cutting tone—even among N4 guitars. This is a model we highly recommend to players seeking a practical, rock-oriented sound.
There are signs of use, including scratches, dents, and some discoloration or rust on parts.
There is some warping in the neck; we have performed a setup including truss rod adjustment, but
there is some slight buzzing when played unplugged, though it is not noticeable when played through an amp.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 0103016
Country of Manufacture: USA
Case: Soft case
Weight: 3.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some twist present)
Fret Wear: Note: Can still withstand filing, but frets are low
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Washburn N4 Ash PWS. This model bears the "Made in USA" stamp and is positioned at the top of the N4 series' production lineup. The body is crafted from ash, resulting in a design that stands out for its light attack and excellent high-end clarity.
It features the classic N4 configuration with a Seymour Duncan pickup in the neck position and a Bill Lawrence L-500 in the bridge position. The neck pickup delivers a thick, smooth clean and crunch tone, while the bridge pickup produces a high-gain tone with sharp attack and excellent separation, making it highly versatile for everything from rhythm work to lead playing.
The direct response characteristic of a U.S.-made guitar, combined with the speed inherent to an ash body, gives this model a particularly crisp and cutting tone—even among N4 guitars. This is a model we highly recommend to players seeking a practical, rock-oriented sound.
There are signs of use, including scratches, dents, and some discoloration or rust on parts.
There is some warping in the neck; we have performed a setup including truss rod adjustment, but
there is some slight buzzing when played unplugged, though it is not noticeable when played through an amp.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 0103016
Country of Manufacture: USA
Case: Soft case
Weight: 3.13 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (some twist present)
Fret Wear: Note: Can still withstand filing, but frets are low
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
