🎉 Up to 70% Off Selected ItemsShop Sale
[SN CIJ O019695] USED Fender Japan / ST71-85TX 3-Tone Sunburst [11]
A Japanese-made reissue model that combines the distinctive look of a '70s Stratocaster with the powerful sound of the Texas Special.
Featuring an ash body and a maple neck, this guitar faithfully reproduces classic '70s Stratocaster details such as a large headstock, a three-point neck joint, and a bullet truss rod.
This model is the “TX” specification, equipped with three USA-made Texas Special pickups. It combines a sharp attack with rich mids, delivering a crisp, bell-like tone when played clean and a resilient Stratocaster sound when driven.
The finish is the classic 3-Tone Sunburst. The distinctive grain of the ash body subtly shines through, giving it a striking appearance. The meticulous craftsmanship characteristic of the "Made in Japan" era is another appealing feature of this guitar.
There are some minor scuffs, but no particularly noticeable scratches.
There is a slight backward bow on the 6th string side of the neck, along with a slight twist. However, there are currently no issues with playability.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: O019695
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 4.17 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.3 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, selector switch cleaning
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring an ash body and a maple neck, this guitar faithfully reproduces classic '70s Stratocaster details such as a large headstock, a three-point neck joint, and a bullet truss rod.
This model is the “TX” specification, equipped with three USA-made Texas Special pickups. It combines a sharp attack with rich mids, delivering a crisp, bell-like tone when played clean and a resilient Stratocaster sound when driven.
The finish is the classic 3-Tone Sunburst. The distinctive grain of the ash body subtly shines through, giving it a striking appearance. The meticulous craftsmanship characteristic of the "Made in Japan" era is another appealing feature of this guitar.
There are some minor scuffs, but no particularly noticeable scratches.
There is a slight backward bow on the 6th string side of the neck, along with a slight twist. However, there are currently no issues with playability.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: O019695
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 4.17 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.3 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, selector switch cleaning
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$4.61
[SN CIJ O019695] USED Fender Japan / ST71-85TX 3-Tone Sunburst [11]—
$4.61
Description
A Japanese-made reissue model that combines the distinctive look of a '70s Stratocaster with the powerful sound of the Texas Special.
Featuring an ash body and a maple neck, this guitar faithfully reproduces classic '70s Stratocaster details such as a large headstock, a three-point neck joint, and a bullet truss rod.
This model is the “TX” specification, equipped with three USA-made Texas Special pickups. It combines a sharp attack with rich mids, delivering a crisp, bell-like tone when played clean and a resilient Stratocaster sound when driven.
The finish is the classic 3-Tone Sunburst. The distinctive grain of the ash body subtly shines through, giving it a striking appearance. The meticulous craftsmanship characteristic of the "Made in Japan" era is another appealing feature of this guitar.
There are some minor scuffs, but no particularly noticeable scratches.
There is a slight backward bow on the 6th string side of the neck, along with a slight twist. However, there are currently no issues with playability.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: O019695
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 4.17 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.3 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, selector switch cleaning
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Featuring an ash body and a maple neck, this guitar faithfully reproduces classic '70s Stratocaster details such as a large headstock, a three-point neck joint, and a bullet truss rod.
This model is the “TX” specification, equipped with three USA-made Texas Special pickups. It combines a sharp attack with rich mids, delivering a crisp, bell-like tone when played clean and a resilient Stratocaster sound when driven.
The finish is the classic 3-Tone Sunburst. The distinctive grain of the ash body subtly shines through, giving it a striking appearance. The meticulous craftsmanship characteristic of the "Made in Japan" era is another appealing feature of this guitar.
There are some minor scuffs, but no particularly noticeable scratches.
There is a slight backward bow on the 6th string side of the neck, along with a slight twist. However, there are currently no issues with playability.
Condition: B+: Some minor scratches, but no issues for normal use
Serial Number: O019695
Year of Manufacture: 1997-2000
Country of Manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 4.17 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.3 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, selector switch cleaning
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
