🎉 Up to 70% Off Selected ItemsShop Sale
[SN 030969] USED T's Guitars / DST-Classic 22 Spalted Maple Top 2-Tone Sunburst [12]
A high-end Japanese-made model featuring a striking spalted maple top.
The DST-Classic 22, a standard model from T's Guitars—a workshop in Nagano Prefecture that handcrafts high-quality electric guitars—has arrived.
It features an ash back and spalted maple top, paired with a maple neck and rosewood fingerboard, and is equipped with 22 frets.
The slightly smaller, dinky-shaped body is lightweight and easy to handle, and with its slim C-shaped neck profile and 10-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models: the DS-592 in the neck and middle positions, and the DH-560/B in the bridge position. The bridge pickup can be coil-tapped using the tone knob’s push/pull function.
With single-coil pickups that offer a flat response and cover a wide range from cutting to driven tones, and a high-gain humbucker dedicated to the bridge position that concentrates the essence of electric guitar sound and covers everything from bluesy tones to destructive drive sounds, this model is capable of handling a truly wide range of genres and styles.
There are signs of touch-up work on the body back where the finish has peeled, and numerous scratches and fine dents are scattered across the body.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 030969
Country of Manufacture: Japan
Case: Genuine gig case
Weight: 3.40 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The DST-Classic 22, a standard model from T's Guitars—a workshop in Nagano Prefecture that handcrafts high-quality electric guitars—has arrived.
It features an ash back and spalted maple top, paired with a maple neck and rosewood fingerboard, and is equipped with 22 frets.
The slightly smaller, dinky-shaped body is lightweight and easy to handle, and with its slim C-shaped neck profile and 10-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models: the DS-592 in the neck and middle positions, and the DH-560/B in the bridge position. The bridge pickup can be coil-tapped using the tone knob’s push/pull function.
With single-coil pickups that offer a flat response and cover a wide range from cutting to driven tones, and a high-gain humbucker dedicated to the bridge position that concentrates the essence of electric guitar sound and covers everything from bluesy tones to destructive drive sounds, this model is capable of handling a truly wide range of genres and styles.
There are signs of touch-up work on the body back where the finish has peeled, and numerous scratches and fine dents are scattered across the body.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 030969
Country of Manufacture: Japan
Case: Genuine gig case
Weight: 3.40 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$7.88
[SN 030969] USED T's Guitars / DST-Classic 22 Spalted Maple Top 2-Tone Sunburst [12]—
$7.88
Description
A high-end Japanese-made model featuring a striking spalted maple top.
The DST-Classic 22, a standard model from T's Guitars—a workshop in Nagano Prefecture that handcrafts high-quality electric guitars—has arrived.
It features an ash back and spalted maple top, paired with a maple neck and rosewood fingerboard, and is equipped with 22 frets.
The slightly smaller, dinky-shaped body is lightweight and easy to handle, and with its slim C-shaped neck profile and 10-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models: the DS-592 in the neck and middle positions, and the DH-560/B in the bridge position. The bridge pickup can be coil-tapped using the tone knob’s push/pull function.
With single-coil pickups that offer a flat response and cover a wide range from cutting to driven tones, and a high-gain humbucker dedicated to the bridge position that concentrates the essence of electric guitar sound and covers everything from bluesy tones to destructive drive sounds, this model is capable of handling a truly wide range of genres and styles.
There are signs of touch-up work on the body back where the finish has peeled, and numerous scratches and fine dents are scattered across the body.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 030969
Country of Manufacture: Japan
Case: Genuine gig case
Weight: 3.40 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The DST-Classic 22, a standard model from T's Guitars—a workshop in Nagano Prefecture that handcrafts high-quality electric guitars—has arrived.
It features an ash back and spalted maple top, paired with a maple neck and rosewood fingerboard, and is equipped with 22 frets.
The slightly smaller, dinky-shaped body is lightweight and easy to handle, and with its slim C-shaped neck profile and 10-inch fingerboard radius, this model offers exceptional playability.
All pickups are original models: the DS-592 in the neck and middle positions, and the DH-560/B in the bridge position. The bridge pickup can be coil-tapped using the tone knob’s push/pull function.
With single-coil pickups that offer a flat response and cover a wide range from cutting to driven tones, and a high-gain humbucker dedicated to the bridge position that concentrates the essence of electric guitar sound and covers everything from bluesy tones to destructive drive sounds, this model is capable of handling a truly wide range of genres and styles.
There are signs of touch-up work on the body back where the finish has peeled, and numerous scratches and fine dents are scattered across the body.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
The tremolo arm is missing.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 030969
Country of Manufacture: Japan
Case: Genuine gig case
Weight: 3.40 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.1 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 22.7 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
