🎉 Up to 70% Off Selected ItemsShop Sale
[SN U04070759] USED Epiphone / Bob Marley Limited Edition Les Paul Special Natural [12]
Limited edition Les Paul Special represents the world of Bob Marley.
This model is scattered with the image of Bob Marley, known as a pioneer of reggae music.
It is based on his beloved Gibson Les Paul Special, but the specifications have been changed in several places to achieve a high cost-performance ratio.
The head logo, the rasta color of the fingerboard inlay, and the face transferred to the body top, all of which make it instantly recognizable as a Bob Marley-inspired model.
Mahogany body/neck and rosewood fingerboard with 22 frets, medium scale specification.
Alnico Classic and Alnico Hot pickups are equipped.
A special soft case is included, and the face is transferred as well as the body top.
There is a noticeable ding on the head top, and there are also minor scuffs and dings throughout.
The paint is matte, but the neck grip and body have a partial glossy finish due to rubbing.
Although the instrument has some signs of use, it has been maintained and cleaned at our repair center, including pot replacement, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: U04070759
Year of manufacture: 2004
Country of manufacture: Korea
Case: Original soft case
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, strap pin replacement, electrical repair (front and rear tone pots replaced)
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This model is scattered with the image of Bob Marley, known as a pioneer of reggae music.
It is based on his beloved Gibson Les Paul Special, but the specifications have been changed in several places to achieve a high cost-performance ratio.
The head logo, the rasta color of the fingerboard inlay, and the face transferred to the body top, all of which make it instantly recognizable as a Bob Marley-inspired model.
Mahogany body/neck and rosewood fingerboard with 22 frets, medium scale specification.
Alnico Classic and Alnico Hot pickups are equipped.
A special soft case is included, and the face is transferred as well as the body top.
There is a noticeable ding on the head top, and there are also minor scuffs and dings throughout.
The paint is matte, but the neck grip and body have a partial glossy finish due to rubbing.
Although the instrument has some signs of use, it has been maintained and cleaned at our repair center, including pot replacement, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: U04070759
Year of manufacture: 2004
Country of manufacture: Korea
Case: Original soft case
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, strap pin replacement, electrical repair (front and rear tone pots replaced)
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$0.92
Original: $2.64
-65%[SN U04070759] USED Epiphone / Bob Marley Limited Edition Les Paul Special Natural [12]—
$2.64
$0.92
Description
Limited edition Les Paul Special represents the world of Bob Marley.
This model is scattered with the image of Bob Marley, known as a pioneer of reggae music.
It is based on his beloved Gibson Les Paul Special, but the specifications have been changed in several places to achieve a high cost-performance ratio.
The head logo, the rasta color of the fingerboard inlay, and the face transferred to the body top, all of which make it instantly recognizable as a Bob Marley-inspired model.
Mahogany body/neck and rosewood fingerboard with 22 frets, medium scale specification.
Alnico Classic and Alnico Hot pickups are equipped.
A special soft case is included, and the face is transferred as well as the body top.
There is a noticeable ding on the head top, and there are also minor scuffs and dings throughout.
The paint is matte, but the neck grip and body have a partial glossy finish due to rubbing.
Although the instrument has some signs of use, it has been maintained and cleaned at our repair center, including pot replacement, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: U04070759
Year of manufacture: 2004
Country of manufacture: Korea
Case: Original soft case
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, strap pin replacement, electrical repair (front and rear tone pots replaced)
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This model is scattered with the image of Bob Marley, known as a pioneer of reggae music.
It is based on his beloved Gibson Les Paul Special, but the specifications have been changed in several places to achieve a high cost-performance ratio.
The head logo, the rasta color of the fingerboard inlay, and the face transferred to the body top, all of which make it instantly recognizable as a Bob Marley-inspired model.
Mahogany body/neck and rosewood fingerboard with 22 frets, medium scale specification.
Alnico Classic and Alnico Hot pickups are equipped.
A special soft case is included, and the face is transferred as well as the body top.
There is a noticeable ding on the head top, and there are also minor scuffs and dings throughout.
The paint is matte, but the neck grip and body have a partial glossy finish due to rubbing.
Although the instrument has some signs of use, it has been maintained and cleaned at our repair center, including pot replacement, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: U04070759
Year of manufacture: 2004
Country of manufacture: Korea
Case: Original soft case
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, strap pin replacement, electrical repair (front and rear tone pots replaced)
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
