🎉 Up to 70% Off Selected ItemsShop Sale
USED Infinite / Modernize Bendtop Order Model Black & Gray [12]
Modernize Bendtop from Infinite, an up-and-coming brand born from a repair workshop in Osaka, has just arrived.
This is the flagship model of Infinite, and its high precision manufacturing technique is fully demonstrated.
The body top is made in the exact same shape as the pickguard, and the pickguard is screwed into the body top.
African mahogany neck, ebony fingerboard, 22 frets, probably made by Jescar, and Buzz Feiton tuning system are installed.
The pickups are decaled DA Neck on the front and DB Bridge on the rear, but we are not sure of the brand or the exact model name.
Coil tap is available by mini switch.
The pegs are GOTOH Magnum locks and the bridge is Wilkinson VS-100N, which allows for smooth arming, stable tuning, and speedy string changes.
The unique 628mm scale is adopted, and the unique neck joint system named "Kogiku Logic" ensures smooth playability at high frets while boasting high strength.
There are paint chips scattered around the periphery of the head top and a blackened spot at the base of the head that may have been caused by a guitar hanger.
The body also has many minor scratches and dings, and there are some small and large paint chips around the back of the body.
The pickguard front pickup cavity has been repaired with a crack.
The arm is missing.
Item Rank: B+: Some scratches, but no problem in normal use.
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.06 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is the flagship model of Infinite, and its high precision manufacturing technique is fully demonstrated.
The body top is made in the exact same shape as the pickguard, and the pickguard is screwed into the body top.
African mahogany neck, ebony fingerboard, 22 frets, probably made by Jescar, and Buzz Feiton tuning system are installed.
The pickups are decaled DA Neck on the front and DB Bridge on the rear, but we are not sure of the brand or the exact model name.
Coil tap is available by mini switch.
The pegs are GOTOH Magnum locks and the bridge is Wilkinson VS-100N, which allows for smooth arming, stable tuning, and speedy string changes.
The unique 628mm scale is adopted, and the unique neck joint system named "Kogiku Logic" ensures smooth playability at high frets while boasting high strength.
There are paint chips scattered around the periphery of the head top and a blackened spot at the base of the head that may have been caused by a guitar hanger.
The body also has many minor scratches and dings, and there are some small and large paint chips around the back of the body.
The pickguard front pickup cavity has been repaired with a crack.
The arm is missing.
Item Rank: B+: Some scratches, but no problem in normal use.
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.06 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$2.57
Original: $7.35
-65%USED Infinite / Modernize Bendtop Order Model Black & Gray [12]—
$7.35
$2.57
Description
Modernize Bendtop from Infinite, an up-and-coming brand born from a repair workshop in Osaka, has just arrived.
This is the flagship model of Infinite, and its high precision manufacturing technique is fully demonstrated.
The body top is made in the exact same shape as the pickguard, and the pickguard is screwed into the body top.
African mahogany neck, ebony fingerboard, 22 frets, probably made by Jescar, and Buzz Feiton tuning system are installed.
The pickups are decaled DA Neck on the front and DB Bridge on the rear, but we are not sure of the brand or the exact model name.
Coil tap is available by mini switch.
The pegs are GOTOH Magnum locks and the bridge is Wilkinson VS-100N, which allows for smooth arming, stable tuning, and speedy string changes.
The unique 628mm scale is adopted, and the unique neck joint system named "Kogiku Logic" ensures smooth playability at high frets while boasting high strength.
There are paint chips scattered around the periphery of the head top and a blackened spot at the base of the head that may have been caused by a guitar hanger.
The body also has many minor scratches and dings, and there are some small and large paint chips around the back of the body.
The pickguard front pickup cavity has been repaired with a crack.
The arm is missing.
Item Rank: B+: Some scratches, but no problem in normal use.
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.06 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is the flagship model of Infinite, and its high precision manufacturing technique is fully demonstrated.
The body top is made in the exact same shape as the pickguard, and the pickguard is screwed into the body top.
African mahogany neck, ebony fingerboard, 22 frets, probably made by Jescar, and Buzz Feiton tuning system are installed.
The pickups are decaled DA Neck on the front and DB Bridge on the rear, but we are not sure of the brand or the exact model name.
Coil tap is available by mini switch.
The pegs are GOTOH Magnum locks and the bridge is Wilkinson VS-100N, which allows for smooth arming, stable tuning, and speedy string changes.
The unique 628mm scale is adopted, and the unique neck joint system named "Kogiku Logic" ensures smooth playability at high frets while boasting high strength.
There are paint chips scattered around the periphery of the head top and a blackened spot at the base of the head that may have been caused by a guitar hanger.
The body also has many minor scratches and dings, and there are some small and large paint chips around the back of the body.
The pickguard front pickup cavity has been repaired with a crack.
The arm is missing.
Item Rank: B+: Some scratches, but no problem in normal use.
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.06 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
