🎉 Up to 70% Off Selected ItemsShop Sale
[SN 72203] USED FERNANDES / FST-70 Burny Custom Sunburst [12]
We have received a shipment of Fernandez ST replica models originally released in the late 1970s.
This is an early ST-type model by Fernandes, featuring a three-piece mahogany body, a one-piece maple neck, and a bullet nut on a large-headstock design.
Although this is an early Japan Vintage model, it faithfully reproduces the characteristics of F Company’s ST models from that era.
The paint on the headstock logo is peeling, and there are numerous fine scratches and dents scattered throughout the body, showing signs of wear commensurate with its age.
The pickup selector has been replaced, and the mounting holes for the selector have been slightly modified as a result.
Due to warping in the neck, the frets have been leveled; however, the remaining fret height is quite low.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 72203
Year of Manufacture: 1970-
Country of Manufacture: Japan
Case: Soft case
Accessories: Tonearm, bridge cover
Weight: 3.48 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues (slight waviness present)
Fret Wear: Replacement should be considered during the next repair
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This is an early ST-type model by Fernandes, featuring a three-piece mahogany body, a one-piece maple neck, and a bullet nut on a large-headstock design.
Although this is an early Japan Vintage model, it faithfully reproduces the characteristics of F Company’s ST models from that era.
The paint on the headstock logo is peeling, and there are numerous fine scratches and dents scattered throughout the body, showing signs of wear commensurate with its age.
The pickup selector has been replaced, and the mounting holes for the selector have been slightly modified as a result.
Due to warping in the neck, the frets have been leveled; however, the remaining fret height is quite low.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 72203
Year of Manufacture: 1970-
Country of Manufacture: Japan
Case: Soft case
Accessories: Tonearm, bridge cover
Weight: 3.48 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues (slight waviness present)
Fret Wear: Replacement should be considered during the next repair
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$0.61
Original: $1.73
-65%[SN 72203] USED FERNANDES / FST-70 Burny Custom Sunburst [12]—
$1.73
$0.61
Description
We have received a shipment of Fernandez ST replica models originally released in the late 1970s.
This is an early ST-type model by Fernandes, featuring a three-piece mahogany body, a one-piece maple neck, and a bullet nut on a large-headstock design.
Although this is an early Japan Vintage model, it faithfully reproduces the characteristics of F Company’s ST models from that era.
The paint on the headstock logo is peeling, and there are numerous fine scratches and dents scattered throughout the body, showing signs of wear commensurate with its age.
The pickup selector has been replaced, and the mounting holes for the selector have been slightly modified as a result.
Due to warping in the neck, the frets have been leveled; however, the remaining fret height is quite low.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 72203
Year of Manufacture: 1970-
Country of Manufacture: Japan
Case: Soft case
Accessories: Tonearm, bridge cover
Weight: 3.48 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues (slight waviness present)
Fret Wear: Replacement should be considered during the next repair
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This is an early ST-type model by Fernandes, featuring a three-piece mahogany body, a one-piece maple neck, and a bullet nut on a large-headstock design.
Although this is an early Japan Vintage model, it faithfully reproduces the characteristics of F Company’s ST models from that era.
The paint on the headstock logo is peeling, and there are numerous fine scratches and dents scattered throughout the body, showing signs of wear commensurate with its age.
The pickup selector has been replaced, and the mounting holes for the selector have been slightly modified as a result.
Due to warping in the neck, the frets have been leveled; however, the remaining fret height is quite low.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 72203
Year of Manufacture: 1970-
Country of Manufacture: Japan
Case: Soft case
Accessories: Tonearm, bridge cover
Weight: 3.48 kg
Truss Rod: Tested up to 60 degrees in both directions; no issues (slight waviness present)
Fret Wear: Replacement should be considered during the next repair
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 21.0 mm
Neck thickness near the 12th fret: 23.7 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
