🎉 Up to 70% Off Selected ItemsShop Sale
[SN ED1042561] USED EDWARDS / E-TE-92CTM/LT Candy Apple Red [12]
The "Edwards" custom Telecaster-style guitar has arrived.
It features an alder body, a hard maple neck with a rosewood fingerboard, and a lacquer finish.
The tone pot is a push-push type, allowing you to produce not only the standard Telecaster sound but also a humbucker-like tone via series wiring of the front and rear pickups.
The pickups have been replaced with Seymour Duncan STR-1 and STL-1 models.
Overall, there are scratches and dents, paint cracks at the joints, paint wear on the headstock, and screw hole marks under the pickguard.
The frets have been dressed and have about 70% of their original height remaining; the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: ED1042561
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.62 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Fret height is sufficient for playable condition
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an alder body, a hard maple neck with a rosewood fingerboard, and a lacquer finish.
The tone pot is a push-push type, allowing you to produce not only the standard Telecaster sound but also a humbucker-like tone via series wiring of the front and rear pickups.
The pickups have been replaced with Seymour Duncan STR-1 and STL-1 models.
Overall, there are scratches and dents, paint cracks at the joints, paint wear on the headstock, and screw hole marks under the pickguard.
The frets have been dressed and have about 70% of their original height remaining; the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: ED1042561
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.62 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Fret height is sufficient for playable condition
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.77
[SN ED1042561] USED EDWARDS / E-TE-92CTM/LT Candy Apple Red [12]—
$3.77
Description
The "Edwards" custom Telecaster-style guitar has arrived.
It features an alder body, a hard maple neck with a rosewood fingerboard, and a lacquer finish.
The tone pot is a push-push type, allowing you to produce not only the standard Telecaster sound but also a humbucker-like tone via series wiring of the front and rear pickups.
The pickups have been replaced with Seymour Duncan STR-1 and STL-1 models.
Overall, there are scratches and dents, paint cracks at the joints, paint wear on the headstock, and screw hole marks under the pickguard.
The frets have been dressed and have about 70% of their original height remaining; the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: ED1042561
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.62 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Fret height is sufficient for playable condition
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an alder body, a hard maple neck with a rosewood fingerboard, and a lacquer finish.
The tone pot is a push-push type, allowing you to produce not only the standard Telecaster sound but also a humbucker-like tone via series wiring of the front and rear pickups.
The pickups have been replaced with Seymour Duncan STR-1 and STL-1 models.
Overall, there are scratches and dents, paint cracks at the joints, paint wear on the headstock, and screw hole marks under the pickguard.
The frets have been dressed and have about 70% of their original height remaining; the neck is in good condition, and the truss rod is adjustable.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: ED1042561
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.62 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Fret height is sufficient for playable condition
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 22.8 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
