🎉 Up to 70% Off Selected ItemsShop Sale
[SN SW140364] USED SCHECTER / PS-S-ST ABT/R [12]
A Schecter ST-style guitar finished in a sleek matte black has arrived.
It features an ash body with a maple neck and rosewood fingerboard, configured with 22 frets, and is equipped with three Schecter-original Monster Tone pickups.
The controls consist of one volume and two tone knobs (Hi-cut + Lo-cut); pulling up the Lo-cut pot allows you to achieve a brighter sound.
Both the body and neck feature a satin finish, ensuring comfortable playability.
While there are minor scratches and dents throughout the body and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: SW140364
Year of Manufacture: 2014
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It features an ash body with a maple neck and rosewood fingerboard, configured with 22 frets, and is equipped with three Schecter-original Monster Tone pickups.
The controls consist of one volume and two tone knobs (Hi-cut + Lo-cut); pulling up the Lo-cut pot allows you to achieve a brighter sound.
Both the body and neck feature a satin finish, ensuring comfortable playability.
While there are minor scratches and dents throughout the body and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: SW140364
Year of Manufacture: 2014
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$4.19
[SN SW140364] USED SCHECTER / PS-S-ST ABT/R [12]—
$4.19
Description
A Schecter ST-style guitar finished in a sleek matte black has arrived.
It features an ash body with a maple neck and rosewood fingerboard, configured with 22 frets, and is equipped with three Schecter-original Monster Tone pickups.
The controls consist of one volume and two tone knobs (Hi-cut + Lo-cut); pulling up the Lo-cut pot allows you to achieve a brighter sound.
Both the body and neck feature a satin finish, ensuring comfortable playability.
While there are minor scratches and dents throughout the body and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: SW140364
Year of Manufacture: 2014
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
It features an ash body with a maple neck and rosewood fingerboard, configured with 22 frets, and is equipped with three Schecter-original Monster Tone pickups.
The controls consist of one volume and two tone knobs (Hi-cut + Lo-cut); pulling up the Lo-cut pot allows you to achieve a brighter sound.
Both the body and neck feature a satin finish, ensuring comfortable playability.
While there are minor scratches and dents throughout the body and some tarnish on the hardware, it shows minimal signs of use and is in good condition.
It has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some minor scratches, but no issues for normal use
Serial Number: SW140364
Year of Manufacture: 2014
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.50 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.9 mm
Scale: 648mm (25.5")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
