🎉 Up to 70% Off Selected ItemsShop Sale
[SN 58147] USED Fernandes / BURNY CUSTOM FST-70 Black [12]
A 1970s Fernandes ST-style guitar has arrived!
Features the cursive logo from before 1977!
Features a body made of sen, an ash substitute, a maple fingerboard, a large headstock, a bullet rod, and a three-point neck joint—
featuring classic 70s-style specifications.
It features a 3-way selector switch.
The tremolo arm and back panel are missing.
The frets have been filed down to a lower profile; while there is currently no muting, it is unlikely they can withstand further filing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While there are some signs of use, the instrument has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B: Shows significant wear and scratches, but is suitable for normal use
Serial Number: 58147
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 4.37 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting, deburring
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Features the cursive logo from before 1977!
Features a body made of sen, an ash substitute, a maple fingerboard, a large headstock, a bullet rod, and a three-point neck joint—
featuring classic 70s-style specifications.
It features a 3-way selector switch.
The tremolo arm and back panel are missing.
The frets have been filed down to a lower profile; while there is currently no muting, it is unlikely they can withstand further filing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While there are some signs of use, the instrument has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B: Shows significant wear and scratches, but is suitable for normal use
Serial Number: 58147
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 4.37 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting, deburring
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.00
Original: $2.85
-65%[SN 58147] USED Fernandes / BURNY CUSTOM FST-70 Black [12]—
$2.85
$1.00
Description
A 1970s Fernandes ST-style guitar has arrived!
Features the cursive logo from before 1977!
Features a body made of sen, an ash substitute, a maple fingerboard, a large headstock, a bullet rod, and a three-point neck joint—
featuring classic 70s-style specifications.
It features a 3-way selector switch.
The tremolo arm and back panel are missing.
The frets have been filed down to a lower profile; while there is currently no muting, it is unlikely they can withstand further filing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While there are some signs of use, the instrument has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B: Shows significant wear and scratches, but is suitable for normal use
Serial Number: 58147
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 4.37 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting, deburring
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Features the cursive logo from before 1977!
Features a body made of sen, an ash substitute, a maple fingerboard, a large headstock, a bullet rod, and a three-point neck joint—
featuring classic 70s-style specifications.
It features a 3-way selector switch.
The tremolo arm and back panel are missing.
The frets have been filed down to a lower profile; while there is currently no muting, it is unlikely they can withstand further filing.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While there are some signs of use, the instrument has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B: Shows significant wear and scratches, but is suitable for normal use
Serial Number: 58147
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 4.37 kg
Truss Rod: Checked up to 60 degrees left and right; no issues
Fret Wear: Replacement should be considered during the next repair
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 40.3 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 25.0 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting, deburring
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values may change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
