🎉 Up to 70% Off Selected ItemsShop Sale
[SN W21031645] USED SCHECTER / Hell Raiser C1 AD-C1-HR Black [12]
We’ve received a used Schecter Diamond Series HELLRAISER.
Featuring a mahogany body and neck with a set-neck construction, the heel design makes the high frets exceptionally easy to play, supporting technical playing styles.
The tight, heavy sound of the EMG pickups pairs perfectly with the substantial mahogany body, allowing for a wide range of tones from high-gain to clean.
It is equipped with EMG 81-TW and 89 pickups, and the push/pull switches on each volume knob allow you to coil-tap each pickup.
Its cool looks and ferocious sound are the secret to its popularity.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: W21031645
Year of Manufacture: 2021
Country of Manufacture: South Korea
Case: Soft case
Weight: 3.09 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 21.9 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a mahogany body and neck with a set-neck construction, the heel design makes the high frets exceptionally easy to play, supporting technical playing styles.
The tight, heavy sound of the EMG pickups pairs perfectly with the substantial mahogany body, allowing for a wide range of tones from high-gain to clean.
It is equipped with EMG 81-TW and 89 pickups, and the push/pull switches on each volume knob allow you to coil-tap each pickup.
Its cool looks and ferocious sound are the secret to its popularity.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: W21031645
Year of Manufacture: 2021
Country of Manufacture: South Korea
Case: Soft case
Weight: 3.09 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 21.9 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.20
Original: $3.42
-65%[SN W21031645] USED SCHECTER / Hell Raiser C1 AD-C1-HR Black [12]—
$3.42
$1.20
Description
We’ve received a used Schecter Diamond Series HELLRAISER.
Featuring a mahogany body and neck with a set-neck construction, the heel design makes the high frets exceptionally easy to play, supporting technical playing styles.
The tight, heavy sound of the EMG pickups pairs perfectly with the substantial mahogany body, allowing for a wide range of tones from high-gain to clean.
It is equipped with EMG 81-TW and 89 pickups, and the push/pull switches on each volume knob allow you to coil-tap each pickup.
Its cool looks and ferocious sound are the secret to its popularity.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: W21031645
Year of Manufacture: 2021
Country of Manufacture: South Korea
Case: Soft case
Weight: 3.09 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 21.9 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Featuring a mahogany body and neck with a set-neck construction, the heel design makes the high frets exceptionally easy to play, supporting technical playing styles.
The tight, heavy sound of the EMG pickups pairs perfectly with the substantial mahogany body, allowing for a wide range of tones from high-gain to clean.
It is equipped with EMG 81-TW and 89 pickups, and the push/pull switches on each volume knob allow you to coil-tap each pickup.
Its cool looks and ferocious sound are the secret to its popularity.
There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish.
While it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: W21031645
Year of Manufacture: 2021
Country of Manufacture: South Korea
Case: Soft case
Weight: 3.09 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.9 mm
Neck thickness near the 1st fret: 20.2 mm
Neck thickness near the 12th fret: 21.9 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
