🎉 Up to 70% Off Selected ItemsShop Sale
[SN 0018946] USED Fender Japan Fender Japan / ST54-85RV 2Tone Sunburst [20]
Fujigen factory made, real vintage, Fender Japan ST54 model.
Light weight ash body, one-piece maple neck with thin flamed finish.
Equipped with USA-made ST-Vintage pickups and round string guides.
Hard 54-style V-neck with unique fit is unique to this model.
Back panel screws are missing, and there are some parts have some cracks and rust.
There are paint cracks near the back contour of the body, and the bottom part of the body has some paint burns.
Overall, there are some paint chips, scratches, and small dents.
After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repairs were performed.
Item rank: B+ (Good)
Year of manufacture: 1993-1994
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine arm, back panel
Country of Origin ： Japan
Weight ： 3.53kg
Serial ： MIJ O018946
Truss Rod: No problem.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Light weight ash body, one-piece maple neck with thin flamed finish.
Equipped with USA-made ST-Vintage pickups and round string guides.
Hard 54-style V-neck with unique fit is unique to this model.
Back panel screws are missing, and there are some parts have some cracks and rust.
There are paint cracks near the back contour of the body, and the bottom part of the body has some paint burns.
Overall, there are some paint chips, scratches, and small dents.
After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repairs were performed.
Item rank: B+ (Good)
Year of manufacture: 1993-1994
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine arm, back panel
Country of Origin ： Japan
Weight ： 3.53kg
Serial ： MIJ O018946
Truss Rod: No problem.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$2.18
Original: $6.22
-65%[SN 0018946] USED Fender Japan Fender Japan / ST54-85RV 2Tone Sunburst [20]—
$6.22
$2.18
Description
Fujigen factory made, real vintage, Fender Japan ST54 model.
Light weight ash body, one-piece maple neck with thin flamed finish.
Equipped with USA-made ST-Vintage pickups and round string guides.
Hard 54-style V-neck with unique fit is unique to this model.
Back panel screws are missing, and there are some parts have some cracks and rust.
There are paint cracks near the back contour of the body, and the bottom part of the body has some paint burns.
Overall, there are some paint chips, scratches, and small dents.
After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repairs were performed.
Item rank: B+ (Good)
Year of manufacture: 1993-1994
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine arm, back panel
Country of Origin ： Japan
Weight ： 3.53kg
Serial ： MIJ O018946
Truss Rod: No problem.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Light weight ash body, one-piece maple neck with thin flamed finish.
Equipped with USA-made ST-Vintage pickups and round string guides.
Hard 54-style V-neck with unique fit is unique to this model.
Back panel screws are missing, and there are some parts have some cracks and rust.
There are paint cracks near the back contour of the body, and the bottom part of the body has some paint burns.
Overall, there are some paint chips, scratches, and small dents.
After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repairs were performed.
Item rank: B+ (Good)
Year of manufacture: 1993-1994
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine arm, back panel
Country of Origin ： Japan
Weight ： 3.53kg
Serial ： MIJ O018946
Truss Rod: No problem.
Fret Remaining: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 23.1mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
