🎉 Up to 70% Off Selected ItemsShop Sale
[SN 16611] USED Edwards Edwards / MR-85 Kirk Hammett Black [20]
The Kirk Hammett model, also sold by ESP, was produced under the Edwards brand.
Based on a wood material with an alder body, maple neck and rosewood fingerboard, it is equipped with Edwards' original EH-120 humbucking pickups.
A Floyd Rose tremolo unit is also installed to produce a powerful and versatile sound.
The 6th string side of the neck is wavy, but there is no sound blockage at present.
There are paint cracks around the joint plate.
There is a crack around the escutcheon screw.
There is a small ding on the tip of the head with a chip in the wood. There are burrs on the frets.
There are other signs of use such as scratches, small dents, and dull parts.
After receiving, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and dullness on the lower part of the body were corrected by compound polishing.
Item rank: B (average)
Truss rod: Plenty of room
Fretboard: 60-70%.
Accessories : Soft case/not genuine
Weight ： 3.85kg
Serial : 16611
Truss Rod: No problem, as confirmed by checking the rod to 60 degrees to the left and right (with waviness).
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.0mm
Neck thickness near 12th fret: 20.9mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Based on a wood material with an alder body, maple neck and rosewood fingerboard, it is equipped with Edwards' original EH-120 humbucking pickups.
A Floyd Rose tremolo unit is also installed to produce a powerful and versatile sound.
The 6th string side of the neck is wavy, but there is no sound blockage at present.
There are paint cracks around the joint plate.
There is a crack around the escutcheon screw.
There is a small ding on the tip of the head with a chip in the wood. There are burrs on the frets.
There are other signs of use such as scratches, small dents, and dull parts.
After receiving, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and dullness on the lower part of the body were corrected by compound polishing.
Item rank: B (average)
Truss rod: Plenty of room
Fretboard: 60-70%.
Accessories : Soft case/not genuine
Weight ： 3.85kg
Serial : 16611
Truss Rod: No problem, as confirmed by checking the rod to 60 degrees to the left and right (with waviness).
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.0mm
Neck thickness near 12th fret: 20.9mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.98
[SN 16611] USED Edwards Edwards / MR-85 Kirk Hammett Black [20]—
$3.98
Description
The Kirk Hammett model, also sold by ESP, was produced under the Edwards brand.
Based on a wood material with an alder body, maple neck and rosewood fingerboard, it is equipped with Edwards' original EH-120 humbucking pickups.
A Floyd Rose tremolo unit is also installed to produce a powerful and versatile sound.
The 6th string side of the neck is wavy, but there is no sound blockage at present.
There are paint cracks around the joint plate.
There is a crack around the escutcheon screw.
There is a small ding on the tip of the head with a chip in the wood. There are burrs on the frets.
There are other signs of use such as scratches, small dents, and dull parts.
After receiving, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and dullness on the lower part of the body were corrected by compound polishing.
Item rank: B (average)
Truss rod: Plenty of room
Fretboard: 60-70%.
Accessories : Soft case/not genuine
Weight ： 3.85kg
Serial : 16611
Truss Rod: No problem, as confirmed by checking the rod to 60 degrees to the left and right (with waviness).
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.0mm
Neck thickness near 12th fret: 20.9mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
Based on a wood material with an alder body, maple neck and rosewood fingerboard, it is equipped with Edwards' original EH-120 humbucking pickups.
A Floyd Rose tremolo unit is also installed to produce a powerful and versatile sound.
The 6th string side of the neck is wavy, but there is no sound blockage at present.
There are paint cracks around the joint plate.
There is a crack around the escutcheon screw.
There is a small ding on the tip of the head with a chip in the wood. There are burrs on the frets.
There are other signs of use such as scratches, small dents, and dull parts.
After receiving, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and dullness on the lower part of the body were corrected by compound polishing.
Item rank: B (average)
Truss rod: Plenty of room
Fretboard: 60-70%.
Accessories : Soft case/not genuine
Weight ： 3.85kg
Serial : 16611
Truss Rod: No problem, as confirmed by checking the rod to 60 degrees to the left and right (with waviness).
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.0mm
Neck thickness near 12th fret: 20.9mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
