🎉 Up to 70% Off Selected ItemsShop Sale
[SN 91012] USED Kawai Kawai / F-III Natural [20]
The F-III series electric guitars are full of originality, including a unique preamp and control system.
The pickups and preamp have been replaced, but the rest of the guitar remains original.
The body is made of Sen, the neck is based on 5-layer wood material of mahogany and maple, and it is equipped with EMG pickups.
The through-neck provides excellent sound and a variety of controls.
The mini switch on the bottom is a dummy.
There is a chip on the edge of the back plate.
There is a ding on the back of the neck with a paint dent. There is a ding on the tip of the back of the head with paint peeling.
There are other signs of use such as minor scratches, small dents, and dull metal parts.
After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment.
Item rank: B+ (Good)
Truss rod : There is enough room.
Fretboard : 60-70%.
Accessories ： Hard case / Non-genuine
Weight ： 3.26kg
Serial ： 91012
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The pickups and preamp have been replaced, but the rest of the guitar remains original.
The body is made of Sen, the neck is based on 5-layer wood material of mahogany and maple, and it is equipped with EMG pickups.
The through-neck provides excellent sound and a variety of controls.
The mini switch on the bottom is a dummy.
There is a chip on the edge of the back plate.
There is a ding on the back of the neck with a paint dent. There is a ding on the tip of the back of the head with paint peeling.
There are other signs of use such as minor scratches, small dents, and dull metal parts.
After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment.
Item rank: B+ (Good)
Truss rod : There is enough room.
Fretboard : 60-70%.
Accessories ： Hard case / Non-genuine
Weight ： 3.26kg
Serial ： 91012
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$6.22
[SN 91012] USED Kawai Kawai / F-III Natural [20]—
$6.22
Description
The F-III series electric guitars are full of originality, including a unique preamp and control system.
The pickups and preamp have been replaced, but the rest of the guitar remains original.
The body is made of Sen, the neck is based on 5-layer wood material of mahogany and maple, and it is equipped with EMG pickups.
The through-neck provides excellent sound and a variety of controls.
The mini switch on the bottom is a dummy.
There is a chip on the edge of the back plate.
There is a ding on the back of the neck with a paint dent. There is a ding on the tip of the back of the head with paint peeling.
There are other signs of use such as minor scratches, small dents, and dull metal parts.
After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment.
Item rank: B+ (Good)
Truss rod : There is enough room.
Fretboard : 60-70%.
Accessories ： Hard case / Non-genuine
Weight ： 3.26kg
Serial ： 91012
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The pickups and preamp have been replaced, but the rest of the guitar remains original.
The body is made of Sen, the neck is based on 5-layer wood material of mahogany and maple, and it is equipped with EMG pickups.
The through-neck provides excellent sound and a variety of controls.
The mini switch on the bottom is a dummy.
There is a chip on the edge of the back plate.
There is a ding on the back of the neck with a paint dent. There is a ding on the tip of the back of the head with paint peeling.
There are other signs of use such as minor scratches, small dents, and dull metal parts.
After arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment.
Item rank: B+ (Good)
Truss rod : There is enough room.
Fretboard : 60-70%.
Accessories ： Hard case / Non-genuine
Weight ： 3.26kg
Serial ： 91012
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
