🎉 Up to 70% Off Selected ItemsShop Sale
[SN 03093526] USED GIBSON USA / 60s Les Paul Standard Plus Light Burst [20]
This is a 2003 Gibson "60s Les Paul Standard Plus".
The body top is made of AAA maple, and the pickguard was not originally installed to show off the grain.
It has a slim taper neck and Burstbucker #1 & #2 pickups.
The pickups are equipped with Burstbucker #1 and #2, which produce a superb Gibson tone with minimal feedback, whether played clean or driven.
There is a crack on the back of the neck that has been repaired.
There are several small dents and dings with dents all over the body, and there are dents with paint cracks on the corners of the body.
There are some parts that are cracked and rusted, and there are line scratches and small dents throughout the body.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 03093526
Year of manufacture: 2003
Country of manufacture: USA
Case: Original hard case
Accessories: Pick guard, wrench
Weight: 4.24kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The body top is made of AAA maple, and the pickguard was not originally installed to show off the grain.
It has a slim taper neck and Burstbucker #1 & #2 pickups.
The pickups are equipped with Burstbucker #1 and #2, which produce a superb Gibson tone with minimal feedback, whether played clean or driven.
There is a crack on the back of the neck that has been repaired.
There are several small dents and dings with dents all over the body, and there are dents with paint cracks on the corners of the body.
There are some parts that are cracked and rusted, and there are line scratches and small dents throughout the body.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 03093526
Year of manufacture: 2003
Country of manufacture: USA
Case: Original hard case
Accessories: Pick guard, wrench
Weight: 4.24kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.92
Original: $11.20
-65%[SN 03093526] USED GIBSON USA / 60s Les Paul Standard Plus Light Burst [20]—
$11.20
$3.92
Description
This is a 2003 Gibson "60s Les Paul Standard Plus".
The body top is made of AAA maple, and the pickguard was not originally installed to show off the grain.
It has a slim taper neck and Burstbucker #1 & #2 pickups.
The pickups are equipped with Burstbucker #1 and #2, which produce a superb Gibson tone with minimal feedback, whether played clean or driven.
There is a crack on the back of the neck that has been repaired.
There are several small dents and dings with dents all over the body, and there are dents with paint cracks on the corners of the body.
There are some parts that are cracked and rusted, and there are line scratches and small dents throughout the body.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 03093526
Year of manufacture: 2003
Country of manufacture: USA
Case: Original hard case
Accessories: Pick guard, wrench
Weight: 4.24kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
The body top is made of AAA maple, and the pickguard was not originally installed to show off the grain.
It has a slim taper neck and Burstbucker #1 & #2 pickups.
The pickups are equipped with Burstbucker #1 and #2, which produce a superb Gibson tone with minimal feedback, whether played clean or driven.
There is a crack on the back of the neck that has been repaired.
There are several small dents and dings with dents all over the body, and there are dents with paint cracks on the corners of the body.
There are some parts that are cracked and rusted, and there are line scratches and small dents throughout the body.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: 03093526
Year of manufacture: 2003
Country of manufacture: USA
Case: Original hard case
Accessories: Pick guard, wrench
Weight: 4.24kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
