🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN CZ504716] USED FENDER CUSTOM SHOP / MBS Custom Stratocaster NOS Black Build by Mark Kendrick [20]
[SN CZ504716] USED FENDER CUSTOM SHOP / MBS Custom Stratocaster NOS Black Build by Mark Kendrick [20]
2005 Master Builder Mark Kendrick, Custom Stratocaster.
This is a Custom Stratocaster, but without Eric Clapton's signature on the back of the head, otherwise the specifications are almost identical.
Nicknamed "Blackie," it has a race sensor, TBX control, mid booster, and a soft V-shaped 22-fret maple neck on an alder body.
The neck in particular is made of one-piece figured maple, which offers beautiful grain movement.
There are several small dents with dings on the lower part of both sides of the body.
The pickguard is bent due to age, and there are some spots on the parts.
There are other minor scratches and small dents.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: CZ504716
Year of manufacture: 2006
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, shield
Weight: 3.46kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.38mm
Neck thickness near 1st fret: 21.66mm
Neck thickness near 12th fret: 23.84mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, snap correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is a Custom Stratocaster, but without Eric Clapton's signature on the back of the head, otherwise the specifications are almost identical.
Nicknamed "Blackie," it has a race sensor, TBX control, mid booster, and a soft V-shaped 22-fret maple neck on an alder body.
The neck in particular is made of one-piece figured maple, which offers beautiful grain movement.
There are several small dents with dings on the lower part of both sides of the body.
The pickguard is bent due to age, and there are some spots on the parts.
There are other minor scratches and small dents.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: CZ504716
Year of manufacture: 2006
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, shield
Weight: 3.46kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.38mm
Neck thickness near 1st fret: 21.66mm
Neck thickness near 12th fret: 23.84mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, snap correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$36.96
[SN CZ504716] USED FENDER CUSTOM SHOP / MBS Custom Stratocaster NOS Black Build by Mark Kendrick [20]—
$36.96
Description
2005 Master Builder Mark Kendrick, Custom Stratocaster.
This is a Custom Stratocaster, but without Eric Clapton's signature on the back of the head, otherwise the specifications are almost identical.
Nicknamed "Blackie," it has a race sensor, TBX control, mid booster, and a soft V-shaped 22-fret maple neck on an alder body.
The neck in particular is made of one-piece figured maple, which offers beautiful grain movement.
There are several small dents with dings on the lower part of both sides of the body.
The pickguard is bent due to age, and there are some spots on the parts.
There are other minor scratches and small dents.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: CZ504716
Year of manufacture: 2006
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, shield
Weight: 3.46kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.38mm
Neck thickness near 1st fret: 21.66mm
Neck thickness near 12th fret: 23.84mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, snap correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This is a Custom Stratocaster, but without Eric Clapton's signature on the back of the head, otherwise the specifications are almost identical.
Nicknamed "Blackie," it has a race sensor, TBX control, mid booster, and a soft V-shaped 22-fret maple neck on an alder body.
The neck in particular is made of one-piece figured maple, which offers beautiful grain movement.
There are several small dents with dings on the lower part of both sides of the body.
The pickguard is bent due to age, and there are some spots on the parts.
There are other minor scratches and small dents.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial number: CZ504716
Year of manufacture: 2006
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, arm, shield
Weight: 3.46kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.38mm
Neck thickness near 1st fret: 21.66mm
Neck thickness near 12th fret: 23.84mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, snap correction
* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
