🎉 Up to 70% Off Selected ItemsShop Sale
[SN W200315] USED DRAGONFLY / BORDER PLUS 650 Black [20]
Dragonfly's Border Plus 650, 650mm scale model, can be used for down-tuning.
This 2mm longer 650 scale model is designed to accommodate original design models and down tuning.
It has a beveled-cut body, angled-head maple neck, Perferro fingerboard, HAF-N4-HARRY & HAF-5T-B4-HRY PU, Vol, Hi/Lo-Pass, Tap SW x2, PU selector, locking pegs and stop tailpiece.
There are dents and dings with paint chips on the front and top corners of the head, and several small dents with dings on the back of the neck.
There is a paint chip on the right horn corner of the top of the body and a paint crack at the neck joint.
There are numerous dents and scratches on the body as a whole, and it has a slightly strong feeling of use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: W200315
Case: Non-authentic soft case
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.9mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment, jack correction
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This 2mm longer 650 scale model is designed to accommodate original design models and down tuning.
It has a beveled-cut body, angled-head maple neck, Perferro fingerboard, HAF-N4-HARRY & HAF-5T-B4-HRY PU, Vol, Hi/Lo-Pass, Tap SW x2, PU selector, locking pegs and stop tailpiece.
There are dents and dings with paint chips on the front and top corners of the head, and several small dents with dings on the back of the neck.
There is a paint chip on the right horn corner of the top of the body and a paint crack at the neck joint.
There are numerous dents and scratches on the body as a whole, and it has a slightly strong feeling of use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: W200315
Case: Non-authentic soft case
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.9mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment, jack correction
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
$3.02
Original: $8.63
-65%[SN W200315] USED DRAGONFLY / BORDER PLUS 650 Black [20]—
$8.63
$3.02
Description
Dragonfly's Border Plus 650, 650mm scale model, can be used for down-tuning.
This 2mm longer 650 scale model is designed to accommodate original design models and down tuning.
It has a beveled-cut body, angled-head maple neck, Perferro fingerboard, HAF-N4-HARRY & HAF-5T-B4-HRY PU, Vol, Hi/Lo-Pass, Tap SW x2, PU selector, locking pegs and stop tailpiece.
There are dents and dings with paint chips on the front and top corners of the head, and several small dents with dings on the back of the neck.
There is a paint chip on the right horn corner of the top of the body and a paint crack at the neck joint.
There are numerous dents and scratches on the body as a whole, and it has a slightly strong feeling of use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: W200315
Case: Non-authentic soft case
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.9mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment, jack correction
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
This 2mm longer 650 scale model is designed to accommodate original design models and down tuning.
It has a beveled-cut body, angled-head maple neck, Perferro fingerboard, HAF-N4-HARRY & HAF-5T-B4-HRY PU, Vol, Hi/Lo-Pass, Tap SW x2, PU selector, locking pegs and stop tailpiece.
There are dents and dings with paint chips on the front and top corners of the head, and several small dents with dings on the back of the neck.
There is a paint chip on the right horn corner of the top of the body and a paint crack at the neck joint.
There are numerous dents and scratches on the body as a whole, and it has a slightly strong feeling of use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.
Serial Number: W200315
Case: Non-authentic soft case
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.9mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string change, rod adjustment, octave adjustment, string height adjustment, jack correction
* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.
* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.
* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
