🎉 Up to 70% Off Selected ItemsShop Sale
[SN 927178] USED GIBSON / 1970s Les Paul Custom Ebony [20]
This is a 1970s Les Paul Custom featuring a Gibson logo without the "i" dot, a 6-digit serial number, and a "MADE IN USA" stamp, along with a 3-piece maple neck and a pancake-style body.
Although the serial number indicates a production date of 1970–1972, it incorporates many features typical of models from 1975 onward, such as a 3-piece maple neck, a 2-piece truss rod cover, thicker frets, and a die-cast tailpiece.
The tuners are Kluson 501VX; the control cavity has a curve, and the ABR-1 bridge bears a patent number.
The pickups have been replaced with Gibson pickups bearing PAF stickers, and the POT date is legible only on the front tone control (manufactured in 1978).
The original frets have worn down significantly, and the nut is made of brass.
There is a crack in the truss rod cover, and one rear pickup escutcheon screw, one back panel screw, the jack plate, and the control knobs have been replaced; some metal parts show tarnish, rust, or thinning plating.
There is an impact mark accompanied by a dent in the wood near the control cavity on the back of the body caused by a screw, and there is paint peeling on the 9th fret of the neck and the top of the headstock.
There are numerous dents accompanied by paint cracks and dents on the body sides and back, and overall, there are many scratches, dull spots in the clear coat, and dents.
The exterior of the included hard case has peeling, and there are numerous stickers attached.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 927178
Country of Manufacture: USA
Case: Genuine hard case
Weight: 4.60 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Defects present; replacement should be considered during next repair
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.3 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, escutcheon height correction, fret correction
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Although the serial number indicates a production date of 1970–1972, it incorporates many features typical of models from 1975 onward, such as a 3-piece maple neck, a 2-piece truss rod cover, thicker frets, and a die-cast tailpiece.
The tuners are Kluson 501VX; the control cavity has a curve, and the ABR-1 bridge bears a patent number.
The pickups have been replaced with Gibson pickups bearing PAF stickers, and the POT date is legible only on the front tone control (manufactured in 1978).
The original frets have worn down significantly, and the nut is made of brass.
There is a crack in the truss rod cover, and one rear pickup escutcheon screw, one back panel screw, the jack plate, and the control knobs have been replaced; some metal parts show tarnish, rust, or thinning plating.
There is an impact mark accompanied by a dent in the wood near the control cavity on the back of the body caused by a screw, and there is paint peeling on the 9th fret of the neck and the top of the headstock.
There are numerous dents accompanied by paint cracks and dents on the body sides and back, and overall, there are many scratches, dull spots in the clear coat, and dents.
The exterior of the included hard case has peeling, and there are numerous stickers attached.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 927178
Country of Manufacture: USA
Case: Genuine hard case
Weight: 4.60 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Defects present; replacement should be considered during next repair
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.3 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, escutcheon height correction, fret correction
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$11.50
Original: $32.86
-65%[SN 927178] USED GIBSON / 1970s Les Paul Custom Ebony [20]—
$32.86
$11.50
Description
This is a 1970s Les Paul Custom featuring a Gibson logo without the "i" dot, a 6-digit serial number, and a "MADE IN USA" stamp, along with a 3-piece maple neck and a pancake-style body.
Although the serial number indicates a production date of 1970–1972, it incorporates many features typical of models from 1975 onward, such as a 3-piece maple neck, a 2-piece truss rod cover, thicker frets, and a die-cast tailpiece.
The tuners are Kluson 501VX; the control cavity has a curve, and the ABR-1 bridge bears a patent number.
The pickups have been replaced with Gibson pickups bearing PAF stickers, and the POT date is legible only on the front tone control (manufactured in 1978).
The original frets have worn down significantly, and the nut is made of brass.
There is a crack in the truss rod cover, and one rear pickup escutcheon screw, one back panel screw, the jack plate, and the control knobs have been replaced; some metal parts show tarnish, rust, or thinning plating.
There is an impact mark accompanied by a dent in the wood near the control cavity on the back of the body caused by a screw, and there is paint peeling on the 9th fret of the neck and the top of the headstock.
There are numerous dents accompanied by paint cracks and dents on the body sides and back, and overall, there are many scratches, dull spots in the clear coat, and dents.
The exterior of the included hard case has peeling, and there are numerous stickers attached.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 927178
Country of Manufacture: USA
Case: Genuine hard case
Weight: 4.60 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Defects present; replacement should be considered during next repair
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.3 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, escutcheon height correction, fret correction
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
Although the serial number indicates a production date of 1970–1972, it incorporates many features typical of models from 1975 onward, such as a 3-piece maple neck, a 2-piece truss rod cover, thicker frets, and a die-cast tailpiece.
The tuners are Kluson 501VX; the control cavity has a curve, and the ABR-1 bridge bears a patent number.
The pickups have been replaced with Gibson pickups bearing PAF stickers, and the POT date is legible only on the front tone control (manufactured in 1978).
The original frets have worn down significantly, and the nut is made of brass.
There is a crack in the truss rod cover, and one rear pickup escutcheon screw, one back panel screw, the jack plate, and the control knobs have been replaced; some metal parts show tarnish, rust, or thinning plating.
There is an impact mark accompanied by a dent in the wood near the control cavity on the back of the body caused by a screw, and there is paint peeling on the 9th fret of the neck and the top of the headstock.
There are numerous dents accompanied by paint cracks and dents on the body sides and back, and overall, there are many scratches, dull spots in the clear coat, and dents.
The exterior of the included hard case has peeling, and there are numerous stickers attached.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 927178
Country of Manufacture: USA
Case: Genuine hard case
Weight: 4.60 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Defects present; replacement should be considered during next repair
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.3 mm
Neck thickness near the 1st fret: 19.7 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, escutcheon height correction, fret correction
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.
* This item is a one-of-a-kind product listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
