🎉 Up to 70% Off Selected ItemsShop Sale
[SN MX16746320] USED FENDER MEXICO / Jimi Hendrix Stratocaster Black [20]
Jimi Hendrix Signature Model Made in Mexico
This model features styling and unique modifications based on the specifications of the guitar he used upside down—despite being left-handed—on a right-handed model.
It features three Pure Vintage 65 Gray-Bottom Single-Coil Strat pickups mounted in a reverse slant configuration.
The back of the headstock features an autograph, and it is fitted with a special neck plate engraved with a silhouette and the "Authentic Hendrix" inscription.
* The selector switch has been replaced.
There are dents on the left side of the top, as well as in the center and lower part of the back.
There are also minor scratches, small dents, and signs of wear such as tarnish on the metal parts.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MX16746320
Year of Manufacture: 2016
Country of Manufacture: Mexico
Case: Non-genuine soft case
Accessories: Non-genuine arm
Weight: 3.57 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 22.2 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, part replacement (SW)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This model features styling and unique modifications based on the specifications of the guitar he used upside down—despite being left-handed—on a right-handed model.
It features three Pure Vintage 65 Gray-Bottom Single-Coil Strat pickups mounted in a reverse slant configuration.
The back of the headstock features an autograph, and it is fitted with a special neck plate engraved with a silhouette and the "Authentic Hendrix" inscription.
* The selector switch has been replaced.
There are dents on the left side of the top, as well as in the center and lower part of the back.
There are also minor scratches, small dents, and signs of wear such as tarnish on the metal parts.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MX16746320
Year of Manufacture: 2016
Country of Manufacture: Mexico
Case: Non-genuine soft case
Accessories: Non-genuine arm
Weight: 3.57 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 22.2 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, part replacement (SW)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$2.18
Original: $6.22
-65%[SN MX16746320] USED FENDER MEXICO / Jimi Hendrix Stratocaster Black [20]—
$6.22
$2.18
Description
Jimi Hendrix Signature Model Made in Mexico
This model features styling and unique modifications based on the specifications of the guitar he used upside down—despite being left-handed—on a right-handed model.
It features three Pure Vintage 65 Gray-Bottom Single-Coil Strat pickups mounted in a reverse slant configuration.
The back of the headstock features an autograph, and it is fitted with a special neck plate engraved with a silhouette and the "Authentic Hendrix" inscription.
* The selector switch has been replaced.
There are dents on the left side of the top, as well as in the center and lower part of the back.
There are also minor scratches, small dents, and signs of wear such as tarnish on the metal parts.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MX16746320
Year of Manufacture: 2016
Country of Manufacture: Mexico
Case: Non-genuine soft case
Accessories: Non-genuine arm
Weight: 3.57 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 22.2 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, part replacement (SW)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
This model features styling and unique modifications based on the specifications of the guitar he used upside down—despite being left-handed—on a right-handed model.
It features three Pure Vintage 65 Gray-Bottom Single-Coil Strat pickups mounted in a reverse slant configuration.
The back of the headstock features an autograph, and it is fitted with a special neck plate engraved with a silhouette and the "Authentic Hendrix" inscription.
* The selector switch has been replaced.
There are dents on the left side of the top, as well as in the center and lower part of the back.
There are also minor scratches, small dents, and signs of wear such as tarnish on the metal parts.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: MX16746320
Year of Manufacture: 2016
Country of Manufacture: Mexico
Case: Non-genuine soft case
Accessories: Non-genuine arm
Weight: 3.57 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 22.2 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, part replacement (SW)
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
