🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

[SN G190087] USED FUJIGEN / J-Standard Mythic JMY-ASH-M TBF Transparent Black Flat [20]

[SN G190087] USED FUJIGEN / J-Standard Mythic JMY-ASH-M TBF Transparent Black Flat [20]

FUJIGEN J-Standard Mythic JMY-ASH-M.
The body is made of ash, the neck is a 5-piece maple and wenge laminate, the fingerboard is maple, and the tuners are made by GOTOH.
Equipped with Seymour Duncan pickups; the tone control features a push-pull switch that allows for tap-tuning via the 1-volume, 1-tone, and 3-way pickup selector.
* The bridge pickup has been replaced (brand unknown).

There is paint chipping on the back of the body and at the corners of the back, and there is a glossy spot on the satin finish near the pickup on the top of the body.
There are small areas of paint chipping near the pickup on the top of the body and near the neck joint, and there are minor dents and scratches throughout the body.

Condition: B+: Some scratches, but no issues for normal use

Serial Number: G190087
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.56 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$1.58

Original: $4.52

-65%
[SN G190087] USED FUJIGEN / J-Standard Mythic JMY-ASH-M TBF Transparent Black Flat [20]

$4.52

$1.58
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15

Description

FUJIGEN J-Standard Mythic JMY-ASH-M.
The body is made of ash, the neck is a 5-piece maple and wenge laminate, the fingerboard is maple, and the tuners are made by GOTOH.
Equipped with Seymour Duncan pickups; the tone control features a push-pull switch that allows for tap-tuning via the 1-volume, 1-tone, and 3-way pickup selector.
* The bridge pickup has been replaced (brand unknown).

There is paint chipping on the back of the body and at the corners of the back, and there is a glossy spot on the satin finish near the pickup on the top of the body.
There are small areas of paint chipping near the pickup on the top of the body and near the neck joint, and there are minor dents and scratches throughout the body.

Condition: B+: Some scratches, but no issues for normal use

Serial Number: G190087
Year of Manufacture: 2019
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.56 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.7 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.