🎉 Up to 70% Off Selected ItemsShop Sale
[SN ES03332145] USED Epiphone / Tom DeLonge Signature ES-333 [20]
Blink-182 guitarist Tom DeLonge's signature ES-333.
A one-of-a-kind signature model featuring a semi-hollow body and USA-made Dirty Fingers humbucker pickups.
It features a maple body, mahogany neck, and rosewood fingerboard, with a single volume control.
There are signs of repair for a neck crack running from the 6th-string nut to the 3rd fret, and multiple dents with indentations on the neck from the 2nd to the 9th fret.
There is paint chipping and cracking on the lower corner of the body top and the neck joint, and there are small dents with indentations on the headstock corner and the body top.
The control knob has an internal crack, and the parts show signs of discoloration and rust.
There are scratches and small dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: EE08032145
Year of Manufacture: 2008
Case: Genuine soft case
Accessories: None
Weight: 3.39 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck crack repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
A one-of-a-kind signature model featuring a semi-hollow body and USA-made Dirty Fingers humbucker pickups.
It features a maple body, mahogany neck, and rosewood fingerboard, with a single volume control.
There are signs of repair for a neck crack running from the 6th-string nut to the 3rd fret, and multiple dents with indentations on the neck from the 2nd to the 9th fret.
There is paint chipping and cracking on the lower corner of the body top and the neck joint, and there are small dents with indentations on the headstock corner and the body top.
The control knob has an internal crack, and the parts show signs of discoloration and rust.
There are scratches and small dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: EE08032145
Year of Manufacture: 2008
Case: Genuine soft case
Accessories: None
Weight: 3.39 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck crack repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$2.18
Original: $6.22
-65%[SN ES03332145] USED Epiphone / Tom DeLonge Signature ES-333 [20]—
$6.22
$2.18
Description
Blink-182 guitarist Tom DeLonge's signature ES-333.
A one-of-a-kind signature model featuring a semi-hollow body and USA-made Dirty Fingers humbucker pickups.
It features a maple body, mahogany neck, and rosewood fingerboard, with a single volume control.
There are signs of repair for a neck crack running from the 6th-string nut to the 3rd fret, and multiple dents with indentations on the neck from the 2nd to the 9th fret.
There is paint chipping and cracking on the lower corner of the body top and the neck joint, and there are small dents with indentations on the headstock corner and the body top.
The control knob has an internal crack, and the parts show signs of discoloration and rust.
There are scratches and small dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: EE08032145
Year of Manufacture: 2008
Case: Genuine soft case
Accessories: None
Weight: 3.39 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck crack repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
A one-of-a-kind signature model featuring a semi-hollow body and USA-made Dirty Fingers humbucker pickups.
It features a maple body, mahogany neck, and rosewood fingerboard, with a single volume control.
There are signs of repair for a neck crack running from the 6th-string nut to the 3rd fret, and multiple dents with indentations on the neck from the 2nd to the 9th fret.
There is paint chipping and cracking on the lower corner of the body top and the neck joint, and there are small dents with indentations on the headstock corner and the body top.
The control knob has an internal crack, and the parts show signs of discoloration and rust.
There are scratches and small dents throughout the instrument.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: EE08032145
Year of Manufacture: 2008
Case: Genuine soft case
Accessories: None
Weight: 3.39 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.8 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, neck crack repair
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
