🎉 Up to 70% Off Selected ItemsShop Sale
[SN 4103195] USED Epiphone / Emperor Thin Body Natural [20]
1984 Epiphone EMPEROR-T.
It features an extremely rare thin-body shape, with a spruce top and maple sides and back.
The neck is constructed of three-piece maple, and the back of the headstock features a stinger design.
The fingerboard is made of ebony.
* The neck exhibits signs of warping, which has been corrected through fret leveling.
The internal body label is missing, and the body binding has chips, cracks, lifting, and discoloration.
The gold hardware shows signs of tarnish and rust, and the plating is thinning in some areas; there are scratches and dents throughout the instrument.
The included hard case has peeling and wear on the exterior.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 4103195
Year of Manufacture: 1984
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 4.44 kg
Truss Rod: Note: Tested up to 45 degrees to the left and right with no issues (twist)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 21.1 mm
Scale: 648mm (25.5")
RADIUS: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an extremely rare thin-body shape, with a spruce top and maple sides and back.
The neck is constructed of three-piece maple, and the back of the headstock features a stinger design.
The fingerboard is made of ebony.
* The neck exhibits signs of warping, which has been corrected through fret leveling.
The internal body label is missing, and the body binding has chips, cracks, lifting, and discoloration.
The gold hardware shows signs of tarnish and rust, and the plating is thinning in some areas; there are scratches and dents throughout the instrument.
The included hard case has peeling and wear on the exterior.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 4103195
Year of Manufacture: 1984
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 4.44 kg
Truss Rod: Note: Tested up to 45 degrees to the left and right with no issues (twist)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 21.1 mm
Scale: 648mm (25.5")
RADIUS: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.92
Original: $11.20
-65%[SN 4103195] USED Epiphone / Emperor Thin Body Natural [20]—
$11.20
$3.92
Description
1984 Epiphone EMPEROR-T.
It features an extremely rare thin-body shape, with a spruce top and maple sides and back.
The neck is constructed of three-piece maple, and the back of the headstock features a stinger design.
The fingerboard is made of ebony.
* The neck exhibits signs of warping, which has been corrected through fret leveling.
The internal body label is missing, and the body binding has chips, cracks, lifting, and discoloration.
The gold hardware shows signs of tarnish and rust, and the plating is thinning in some areas; there are scratches and dents throughout the instrument.
The included hard case has peeling and wear on the exterior.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 4103195
Year of Manufacture: 1984
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 4.44 kg
Truss Rod: Note: Tested up to 45 degrees to the left and right with no issues (twist)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 21.1 mm
Scale: 648mm (25.5")
RADIUS: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It features an extremely rare thin-body shape, with a spruce top and maple sides and back.
The neck is constructed of three-piece maple, and the back of the headstock features a stinger design.
The fingerboard is made of ebony.
* The neck exhibits signs of warping, which has been corrected through fret leveling.
The internal body label is missing, and the body binding has chips, cracks, lifting, and discoloration.
The gold hardware shows signs of tarnish and rust, and the plating is thinning in some areas; there are scratches and dents throughout the instrument.
The included hard case has peeling and wear on the exterior.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 4103195
Year of Manufacture: 1984
Country of Manufacture: Japan
Case: Genuine hard case
Weight: 4.44 kg
Truss Rod: Note: Tested up to 45 degrees to the left and right with no issues (twist)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 21.1 mm
Scale: 648mm (25.5")
RADIUS: 305mm (12")
Strings at setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
