π Up to 70% Off Selected ItemsShop Sale
HomeStore
[SN 01-02-12N] USED TOM ANDERSON / The Classic Ash Bora Bora Blue with Maple Fingerboard and Floyd Rose Locking Tremolo [20]
[SN 01-02-12N] USED TOM ANDERSON / The Classic Ash Bora Bora Blue with Maple Fingerboard and Floyd Rose Locking Tremolo [20]
Highly recommended for those looking for a practical design
The control layout features one volume knob, one tone knob, and a Switcharoo System mini-switch.
The body is made of swamp ash, the neck is hard rock maple, and itβs equipped with the original SA1R+SA1+H3 pickups.
It offers just the right amount of gain, is low-noise, and is easy to play.
The back panel is missing, and there is some discoloration and minor rust on the parts.
There are several small dents with indentations on both sides of the body.
There are also some scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 01-02-12N
Year of Manufacture: 2012
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm, Spec Sheet
Weight: 3.27 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight twist present)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.3 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 254β356 mm (10β14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The control layout features one volume knob, one tone knob, and a Switcharoo System mini-switch.
The body is made of swamp ash, the neck is hard rock maple, and itβs equipped with the original SA1R+SA1+H3 pickups.
It offers just the right amount of gain, is low-noise, and is easy to play.
The back panel is missing, and there is some discoloration and minor rust on the parts.
There are several small dents with indentations on both sides of the body.
There are also some scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 01-02-12N
Year of Manufacture: 2012
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm, Spec Sheet
Weight: 3.27 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight twist present)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.3 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 254β356 mm (10β14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$7.62
Original: $21.77
-65%[SN 01-02-12N] USED TOM ANDERSON / The Classic Ash Bora Bora Blue with Maple Fingerboard and Floyd Rose Locking Tremolo [20]β
$21.77
$7.62
Description
Highly recommended for those looking for a practical design
The control layout features one volume knob, one tone knob, and a Switcharoo System mini-switch.
The body is made of swamp ash, the neck is hard rock maple, and itβs equipped with the original SA1R+SA1+H3 pickups.
It offers just the right amount of gain, is low-noise, and is easy to play.
The back panel is missing, and there is some discoloration and minor rust on the parts.
There are several small dents with indentations on both sides of the body.
There are also some scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 01-02-12N
Year of Manufacture: 2012
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm, Spec Sheet
Weight: 3.27 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight twist present)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.3 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 254β356 mm (10β14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
The control layout features one volume knob, one tone knob, and a Switcharoo System mini-switch.
The body is made of swamp ash, the neck is hard rock maple, and itβs equipped with the original SA1R+SA1+H3 pickups.
It offers just the right amount of gain, is low-noise, and is easy to play.
The back panel is missing, and there is some discoloration and minor rust on the parts.
There are several small dents with indentations on both sides of the body.
There are also some scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 01-02-12N
Year of Manufacture: 2012
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm, Spec Sheet
Weight: 3.27 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (slight twist present)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.3 mm
Neck thickness near the 1st fret: 20.7 mm
Neck thickness near the 12th fret: 22.3 mm
Scale: 648mm (25.5")
Radius: 254β356 mm (10β14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
