🎉 Up to 70% Off Selected ItemsShop Sale
[SN 14041500549] USED Epiphone / Riviera P93 Red Pearl [20]
The Riviera Custom: A limited-edition model.
Among Epiphone’s Hollow Series, the Riviera is often considered a connoisseur’s choice compared to the Casino and DOT models, but this Riviera Custom stands out with its three P-90 pickups and a bold, eye-catching look.
* When this guitar arrived at our shop, the side plates (metal plates) for the middle and rear pickups were damaged. We soldered the broken parts back together to secure them in place (so they catch on the body).
* The base of the rear pickup was damaged. We repaired it with adhesive, but since it was misaligned with the screw holes on the body, we filled the original hole and drilled a new one. There was also a residue resembling adhesive residue that interfered with the body and made installation difficult, so we removed it and secured the pickup in place.
(For aesthetic reasons, it has been mounted on the 1st string side, where it is hidden by the pickguard.)
* Upon arrival at our shop, the original Bigsby tailpiece was cracked and damaged, so we replaced it with a Bigsby B70.
Due to a slight misalignment with the screw holes, we filled the original holes, drilled new ones, and installed the unit.
There is paint chipping on the lower back of the body, and there are overall scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 14041500549
Year of Manufacture: 2014
Case: Genuine soft case
Weight: 3.85 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Bigsby replacement
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of adhesive on middle and rear pickup side brackets, adhesive installation of rear pickup base, Bigsby replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Among Epiphone’s Hollow Series, the Riviera is often considered a connoisseur’s choice compared to the Casino and DOT models, but this Riviera Custom stands out with its three P-90 pickups and a bold, eye-catching look.
* When this guitar arrived at our shop, the side plates (metal plates) for the middle and rear pickups were damaged. We soldered the broken parts back together to secure them in place (so they catch on the body).
* The base of the rear pickup was damaged. We repaired it with adhesive, but since it was misaligned with the screw holes on the body, we filled the original hole and drilled a new one. There was also a residue resembling adhesive residue that interfered with the body and made installation difficult, so we removed it and secured the pickup in place.
(For aesthetic reasons, it has been mounted on the 1st string side, where it is hidden by the pickguard.)
* Upon arrival at our shop, the original Bigsby tailpiece was cracked and damaged, so we replaced it with a Bigsby B70.
Due to a slight misalignment with the screw holes, we filled the original holes, drilled new ones, and installed the unit.
There is paint chipping on the lower back of the body, and there are overall scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 14041500549
Year of Manufacture: 2014
Case: Genuine soft case
Weight: 3.85 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Bigsby replacement
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of adhesive on middle and rear pickup side brackets, adhesive installation of rear pickup base, Bigsby replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$3.36
[SN 14041500549] USED Epiphone / Riviera P93 Red Pearl [20]—
$3.36
Description
The Riviera Custom: A limited-edition model.
Among Epiphone’s Hollow Series, the Riviera is often considered a connoisseur’s choice compared to the Casino and DOT models, but this Riviera Custom stands out with its three P-90 pickups and a bold, eye-catching look.
* When this guitar arrived at our shop, the side plates (metal plates) for the middle and rear pickups were damaged. We soldered the broken parts back together to secure them in place (so they catch on the body).
* The base of the rear pickup was damaged. We repaired it with adhesive, but since it was misaligned with the screw holes on the body, we filled the original hole and drilled a new one. There was also a residue resembling adhesive residue that interfered with the body and made installation difficult, so we removed it and secured the pickup in place.
(For aesthetic reasons, it has been mounted on the 1st string side, where it is hidden by the pickguard.)
* Upon arrival at our shop, the original Bigsby tailpiece was cracked and damaged, so we replaced it with a Bigsby B70.
Due to a slight misalignment with the screw holes, we filled the original holes, drilled new ones, and installed the unit.
There is paint chipping on the lower back of the body, and there are overall scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 14041500549
Year of Manufacture: 2014
Case: Genuine soft case
Weight: 3.85 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Bigsby replacement
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of adhesive on middle and rear pickup side brackets, adhesive installation of rear pickup base, Bigsby replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
Among Epiphone’s Hollow Series, the Riviera is often considered a connoisseur’s choice compared to the Casino and DOT models, but this Riviera Custom stands out with its three P-90 pickups and a bold, eye-catching look.
* When this guitar arrived at our shop, the side plates (metal plates) for the middle and rear pickups were damaged. We soldered the broken parts back together to secure them in place (so they catch on the body).
* The base of the rear pickup was damaged. We repaired it with adhesive, but since it was misaligned with the screw holes on the body, we filled the original hole and drilled a new one. There was also a residue resembling adhesive residue that interfered with the body and made installation difficult, so we removed it and secured the pickup in place.
(For aesthetic reasons, it has been mounted on the 1st string side, where it is hidden by the pickguard.)
* Upon arrival at our shop, the original Bigsby tailpiece was cracked and damaged, so we replaced it with a Bigsby B70.
Due to a slight misalignment with the screw holes, we filled the original holes, drilled new ones, and installed the unit.
There is paint chipping on the lower back of the body, and there are overall scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: 14041500549
Year of Manufacture: 2014
Case: Genuine soft case
Weight: 3.85 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.3 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Modifications: Bigsby replacement
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of adhesive on middle and rear pickup side brackets, adhesive installation of rear pickup base, Bigsby replacement
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These figures are intended as a reference at the time of purchase and do not guarantee that the measurements will be the same when the item arrives.
* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
