🎉 Up to 70% Off Selected ItemsShop Sale
[SN ED1512175] USED EDWARDS / E-SN-130M/3S Burner [20]
The E-SN-130M/3S is a 3-single-coil version from the E-SN series, which carries on the SNAPPER style.
The body is crafted from lightweight swamp ash.
The neck is made of hard maple and is attached to the body via a detachable joint.
The pickups are Seymour Duncan: an SSL-1 on the neck, an SSL-1RW in the middle, and an SSL-3 at the bridge.
The middle-tone pot is a switch pot; pushing it activates "Custom Mode," allowing all three pickups to be played simultaneously.
There is a crack in the finish at the neck joint, and the backplate shows signs of sticker burn.
Overall, there are minor scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: ED1512175
Year of Manufacture: 2015
Case: Non-original gig bag
Accessories: Arm
Weight: 3.74 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The body is crafted from lightweight swamp ash.
The neck is made of hard maple and is attached to the body via a detachable joint.
The pickups are Seymour Duncan: an SSL-1 on the neck, an SSL-1RW in the middle, and an SSL-3 at the bridge.
The middle-tone pot is a switch pot; pushing it activates "Custom Mode," allowing all three pickups to be played simultaneously.
There is a crack in the finish at the neck joint, and the backplate shows signs of sticker burn.
Overall, there are minor scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: ED1512175
Year of Manufacture: 2015
Case: Non-original gig bag
Accessories: Arm
Weight: 3.74 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
$3.77
[SN ED1512175] USED EDWARDS / E-SN-130M/3S Burner [20]—
$3.77
Description
The E-SN-130M/3S is a 3-single-coil version from the E-SN series, which carries on the SNAPPER style.
The body is crafted from lightweight swamp ash.
The neck is made of hard maple and is attached to the body via a detachable joint.
The pickups are Seymour Duncan: an SSL-1 on the neck, an SSL-1RW in the middle, and an SSL-3 at the bridge.
The middle-tone pot is a switch pot; pushing it activates "Custom Mode," allowing all three pickups to be played simultaneously.
There is a crack in the finish at the neck joint, and the backplate shows signs of sticker burn.
Overall, there are minor scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: ED1512175
Year of Manufacture: 2015
Case: Non-original gig bag
Accessories: Arm
Weight: 3.74 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
The body is crafted from lightweight swamp ash.
The neck is made of hard maple and is attached to the body via a detachable joint.
The pickups are Seymour Duncan: an SSL-1 on the neck, an SSL-1RW in the middle, and an SSL-3 at the bridge.
The middle-tone pot is a switch pot; pushing it activates "Custom Mode," allowing all three pickups to be played simultaneously.
There is a crack in the finish at the neck joint, and the backplate shows signs of sticker burn.
Overall, there are minor scratches and small dents.
Condition: B+: Some scratches, but no issues for normal use
Serial Number: ED1512175
Year of Manufacture: 2015
Case: Non-original gig bag
Accessories: Arm
Weight: 3.74 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 356mm (14")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and dressing
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
