🎉 Up to 70% Off Selected ItemsShop Sale
[SN 1100593] USED ARIA / PE-R80 AB Antique Brown [20]
This is the Aria Pro II "PE-R80," manufactured in 1981.
It is a model that epitomized the Aria Pro II of that era and became a popular model after being used by artists such as Kazumi Watanabe and Masaki Matsubara.
The body is a 3-piece maple/mahogany/maple construction, the neck is maple, the fingerboard is rosewood, it features two CLASSIC POWER pickups, and it has a medium scale length.
Both the top and back are arched, and the neck joint features a deep heel-less cut, making this a model with excellent playability in the higher registers.
Each control is equipped with a tap switch, allowing for a wide range of sound shaping.
There is a dent with paint chipping and indentation at the corner of the headstock, and there is a dent with paint cracking and indentation on the back of the body.
The jack plate is cracked, and the parts show signs of tarnish, rust, and peeling plating.
There are scratches and dents throughout the instrument.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 1100593
Year of Manufacture: 1981
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.87 kg
Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is a model that epitomized the Aria Pro II of that era and became a popular model after being used by artists such as Kazumi Watanabe and Masaki Matsubara.
The body is a 3-piece maple/mahogany/maple construction, the neck is maple, the fingerboard is rosewood, it features two CLASSIC POWER pickups, and it has a medium scale length.
Both the top and back are arched, and the neck joint features a deep heel-less cut, making this a model with excellent playability in the higher registers.
Each control is equipped with a tap switch, allowing for a wide range of sound shaping.
There is a dent with paint chipping and indentation at the corner of the headstock, and there is a dent with paint cracking and indentation on the back of the body.
The jack plate is cracked, and the parts show signs of tarnish, rust, and peeling plating.
There are scratches and dents throughout the instrument.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 1100593
Year of Manufacture: 1981
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.87 kg
Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
$1.58
Original: $4.52
-65%[SN 1100593] USED ARIA / PE-R80 AB Antique Brown [20]—
$4.52
$1.58
Description
This is the Aria Pro II "PE-R80," manufactured in 1981.
It is a model that epitomized the Aria Pro II of that era and became a popular model after being used by artists such as Kazumi Watanabe and Masaki Matsubara.
The body is a 3-piece maple/mahogany/maple construction, the neck is maple, the fingerboard is rosewood, it features two CLASSIC POWER pickups, and it has a medium scale length.
Both the top and back are arched, and the neck joint features a deep heel-less cut, making this a model with excellent playability in the higher registers.
Each control is equipped with a tap switch, allowing for a wide range of sound shaping.
There is a dent with paint chipping and indentation at the corner of the headstock, and there is a dent with paint cracking and indentation on the back of the body.
The jack plate is cracked, and the parts show signs of tarnish, rust, and peeling plating.
There are scratches and dents throughout the instrument.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 1100593
Year of Manufacture: 1981
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.87 kg
Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
It is a model that epitomized the Aria Pro II of that era and became a popular model after being used by artists such as Kazumi Watanabe and Masaki Matsubara.
The body is a 3-piece maple/mahogany/maple construction, the neck is maple, the fingerboard is rosewood, it features two CLASSIC POWER pickups, and it has a medium scale length.
Both the top and back are arched, and the neck joint features a deep heel-less cut, making this a model with excellent playability in the higher registers.
Each control is equipped with a tap switch, allowing for a wide range of sound shaping.
There is a dent with paint chipping and indentation at the corner of the headstock, and there is a dent with paint cracking and indentation on the back of the body.
The jack plate is cracked, and the parts show signs of tarnish, rust, and peeling plating.
There are scratches and dents throughout the instrument.
Condition Grade: B+: Some scratches, but no issues for normal use
Serial Number: 1100593
Year of Manufacture: 1981
Country of Manufacture: Japan
Case: Non-original soft case
Weight: 3.87 kg
Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low-string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.6 mm
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.
* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.
* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
